pyprofibus?
On Fri, 3 Feb 2017 02:02:23 +
Chris Morley wrote:
> I use mitsubishi VFDs particularly the e700 series.
>
> They use a rs-485 serial connection.
>
> I have a python program to communicate with them.
>
>
> I've also toyed with a Yaskawa drive with Classicladder over modbus.
>
nhanced Machine Controller (EMC)"
Subject: [Emc-users] VFD recommendations, pyprofibus?
Date: Fri, Feb 3, 2017 8:43 AM
pyprofibus?
On Fri, 3 Feb 2017 02:02:23 +
Chris Morley wrote:
> I use mitsubishi VFDs particularly the e700 series.
>
> They use a rs-485 serial connection.
&
On 02/03/2017 11:53 AM, Chris Morley wrote:
>
> No I wrote a python HAL program that used the serial port. I used a
> converter to convert from rs232 to 485.I referenced Mitsubishi papers
> for the protocol. I can add it to linuxcnc if anyone is interested.
I think it would be a good addition (esp
to 485.I referenced Mitsubishi papers for the protocol.
> I can add it to linuxcnc if anyone is interested.
>
> Chris M
>
> - Reply message -
> From: "Nicklas Karlsson"
> To: "Enhanced Machine Controller (EMC)"
> Subject: [Emc-users] VFD recommen
On Friday 03 February 2017 13:53:09 Chris Morley wrote:
> No I wrote a python HAL program that used the serial port. I used a
> converter to convert from rs232 to 485.I referenced Mitsubishi papers
> for the protocol. I can add it to linuxcnc if anyone is interested.
>
> Chris M
Please do Chris.
I believe it's Mitsubishi's own. It's similar to modbus. I have run A500 and
E700 series. They are basically the same E series allows more status
- Reply message -
From: "Nicklas Karlsson"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-use
