d limit the G0 speed.
- Original Message -
From: "Marius Liebenberg"
To: "Enhanced Machine Controller (EMC)"
Sent: Wednesday, January 13, 2016 1:33:01 AM
Subject: Re: [Emc-users] Very strange behaviour
I did make the F and the jog speed the same but still had the the
on it in the silkscreen. Its cheap
but its control trouble. Best IMO is a now disco'ed C1G from cnc4pc,
but bring more bucks.
> -- Original Message --
> From: "TJoseph Powderly"
> To: "Marius Liebenberg" ; "Enhanced Machine
> Controller (EMC)&quo
I did make the F and the jog speed the same but still had the the
problem. That is why it is strange to me.
-- Original Message --
From: "TJoseph Powderly"
To: "Marius Liebenberg" ; "Enhanced Machine
Controller (EMC)"
Sent: 2016-01-13 02:05:48
Subject
G0 rate faster than G1/2/3 which uses F ?
tomp/tjtr33
--
Site24x7 APM Insight: Get Deep Visibility into Application Performance
APM + Mobile APM + RUM: Monitor 3 App instances at just $35/Month
Monitor end-to-end web trans
eed (2500mm/min) on both. I set F2500 and
>>I
>> set the jog speed at 2500 with the slider.
>> I am using Gmoccapy
>>
>>
>> -- Original Message --
>> From: "andy pugh"
>> To: "Marius Liebenberg" ; "Enhanced Machin
- Original Message --
> From: "andy pugh"
> To: "Marius Liebenberg" ; "Enhanced Machine
> Controller (EMC)"
> Sent: 2016-01-12 13:58:27
> Subject: Re: [Emc-users] Very strange behaviour
>
>> On 12 January 2016 at 11:39, Marius Liebenberg
>&g
-12 13:58:27
Subject: Re: [Emc-users] Very strange behaviour
>On 12 January 2016 at 11:39, Marius Liebenberg
>wrote:
>
>> I have a machine that I am busy doing the calibration on. I found
>>that
>> when I use a G1y2000 it would travel the full distance but if I use a
&g
On 12 January 2016 at 11:39, Marius Liebenberg wrote:
> I have a machine that I am busy doing the calibration on. I found that
> when I use a G1y2000 it would travel the full distance but if I use a
> G0y2000 it only goes 64% of the way. G0Y0 will bring it back to zero. It
> is repeatable.
What
Hi All
I have a machine that I am busy doing the calibration on. I found that
when I use a G1y2000 it would travel the full distance but if I use a
G0y2000 it only goes 64% of the way. G0Y0 will bring it back to zero. It
is repeatable.
Is there a setting or something that I am missing.
--
