To a classicladder input just like the dahlih. The correct configuration
files are HTTP://WWW.mpm1.com:8080/machines/blue/cinci
This started after we installed a new spindle drive. I have been unable to
find an incorrect Hal connection. I need an idea of what to look for.
On Feb 5, 2011 5:26 PM,
On Sat, Feb 05, 2011 at 04:07:42PM -0600, Stuart Stevenson wrote:
> Gentlemen,
> the other question worked so well I want to try another
> The cinci will move only about .05 in per cycle start press, then it
> pauses. Another press of cycle start results in another small move and then
> another
I had a similar problem when I was building my pendant. In that case, it
turned out that I had accidentally wired my cycle start button to the halui
pins for both start and stop, i.e., pressing the switch tickled both pins.
Axis would either run for a split second and stop or just sit there staring
Gentlemen,
the other question worked so well I want to try another
The cinci will move only about .05 in per cycle start press, then it
pauses. Another press of cycle start results in another small move and then
another pause.
What should I look at?
thank
Stuart
--
dos centavos
--
