Chris Radek wrote:
>Actually no, if you look closely at his error, you can see he
>has a much larger deviation.
>
>[ 193.318209] In recent history there were
>
>[ 193.318211] 2412729, 2414583, 2413107, 2413341, and 2415294
Thanks,
I'll look into these items.
Kirk
On Fri, 2006-12-29 at 15:36 -0600, Chris Radek wrote:
> On Fri, Dec 29, 2006 at 10:15:58PM +0100, Mario. wrote:
> > This problem is being solved by increasing the jitter tolerance from
> > +-5% to +-10%, it will be in the next release of EMC.
> >
> > (se
On Fri, Dec 29, 2006 at 10:15:58PM +0100, Mario. wrote:
> This problem is being solved by increasing the jitter tolerance from
> +-5% to +-10%, it will be in the next release of EMC.
>
> (see my ~20-mails long conversation on this topic in emc-developers)
>
> The message is only a warning, not a
This problem is being solved by increasing the jitter tolerance from
+-5% to +-10%, it will be in the next release of EMC.
(see my ~20-mails long conversation on this topic in emc-developers)
The message is only a warning, not a catastrophic error, no need to be scared...
On 12/29/06, Kirk <[EMA
I have EMC2 running on a three axis Mill. It runs great however
whenever I start up the HMI program an error is reported. It says that
I should check dmeg. I have included a copy of the dmesg output. I'm
sure I need to change the configuration of RTAI but I don't have the
slightest idea of what
