Axes working now. I found my error in configuration. The axes were moving
in the commanded direction, but I didn't notice that the encoder was
reading the opposite sign of that direction.
Duh!
On Thu, Apr 9, 2020 at 10:01 PM Joe H <67p...@gmail.com> wrote:
> Thanks, Gene I won't dwell on that the
Thanks, Gene I won't dwell on that then. It must be something else I've
done incorrectly.
On Thu, Apr 9, 2020 at 9:33 PM Gene Heskett wrote:
> On Thursday 09 April 2020 20:28:55 Joe H wrote:
>
> > Should I be able to jog the axes with the drive not enabled through
> > LinuxCNC with a 7i33? I hav
On Thursday 09 April 2020 20:28:55 Joe H wrote:
> Should I be able to jog the axes with the drive not enabled through
> LinuxCNC with a 7i33? I have not had any success in being able to
> control movement, speed, or distance either in continuous or in step
> increments. It moves in the correct dir
Should I be able to jog the axes with the drive not enabled through
LinuxCNC with a 7i33? I have not had any success in being able to control
movement, speed, or distance either in continuous or in step increments. It
moves in the correct direction, but only stops when it exceeds following
error. I
Thank you, Andy, Peter.
I will try this and spend more time and effort in PID tuning per John
Thornton's tutorial.
On Sun, Apr 5, 2020 at 9:18 PM andy pugh wrote:
> On Mon, 6 Apr 2020 at 01:18, Joe H <67p...@gmail.com> wrote:
>
> > How can I scale the motor input/output and keep the encoders sca
On Mon, 6 Apr 2020 at 01:18, Joe H <67p...@gmail.com> wrote:
> How can I scale the motor input/output and keep the encoders scaled
> properly in a set up like this?
Completely ignore the motors and gearing. Configure with the actual
ballscrew pitch and all geared 1:1
--
atp
"A motorcycle is a b
On Sun, 5 Apr 2020, Joe H wrote:
Date: Sun, 5 Apr 2020 19:53:47 -0400
From: Joe H <67p...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] help needed with configuration
Hi all, I hope everyo
Hi all, I hope everyone is well.
I have mounted encoders on the ball screws of my mill so that I can keep
the working tach's on the motors.
When trying to configure it using PNCconf wizard, it seems to be made to
configure with encoders on the motors. With the encoders scaled to track
accurately, I