Thanks Jeff,
This is it, it works now!
Adam
2008/11/11 Jeff Epler <[EMAIL PROTECTED]>
> On the parport there is an 'in-not' pin for every 'in' pin.
>http://www.linuxcnc.org/docview/html//hal_drivers.html#r1_1_2
> it sounds like you should use in-not in your case:
>net home+limitX parpor
On the parport there is an 'in-not' pin for every 'in' pin.
http://www.linuxcnc.org/docview/html//hal_drivers.html#r1_1_2
it sounds like you should use in-not in your case:
net home+limitX parport.0.pin-11-in-not => axis.0.neg-lim-sw-in
Jeff
---
Hi!
I have currently installed my system with EMC2 and started to configure the
HAL file. The setup works properly except for one thing: I have 3 separate
home switches and 3 limits on the other side of the axes. The home switches
are used only to determine the reference point as usually but I wou
