sers] limit/home switches on dual motor gantry
To: "Enhanced Machine Controller (EMC)"
Message-ID: <[EMAIL PROTECTED]>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
I saw a sample config that does that. I seem to remember it is in
/etc/emc2/sample-configs/step
I saw a sample config that does that. I seem to remember it is in
/etc/emc2/sample-configs/stepper-gantry or similar.
It isn't exactly what you want, but it should get you going down the
right track!
Dan Clarke wrote:
> Hello,
>
> I am a new user of EMC and I am using it to control a 5'x10' CN
Hello,
I am a new user of EMC and I am using it to control a 5'x10' CNC router
table that uses 2 motors to drive the gantry on the X axis, (one motor on
each end of the gantry). I am simply just splitting the step and direction
output signals for the X axis to 2 stepper drives. I have been runn