On Fri, 25 Nov 2011 22:08:36 +, you wrote:
>On 25 November 2011 21:55, andy pugh wrote:
>
>> However, I just tried the command and got "X server insecure (must use
>> xauth-style authorization); command ignored" so I am not sure if it
>> works or not (this was in a VM, so might well be non-ty
>Andy thanks for the quick response. I tried this but it did not work on my
>system. I am running Axis ver 2.3.5 could that have anything to do with it?
>I did not get any faults, it just executed the code but did not clear.
I think that is the problem. I ran the lines individually from a
termina
>OK, just tried it on a real machine, and it worked fine.
>So, in the directory referenced by PROGRAM_PREFIX in >your INI file,
>(probably home/emc2/nc_files) create a text file containing >the
>following lines.
>#!/bin/sh
>axis-remote --clear
>exit 0
>Then save that file with the filename "M101
On 25 November 2011 21:55, andy pugh wrote:
> However, I just tried the command and got "X server insecure (must use
> xauth-style authorization); command ignored" so I am not sure if it
> works or not (this was in a VM, so might well be non-typical)
OK, just tried it on a real machine, and it w
On 25 November 2011 21:15, Mike Cinquino wrote:
> Is it possible to clear the live backplot at the start of part program from
> the part program? I am using Axis.
I don't think you can do it from G-code, but I think a custom M-code
which calls axis-remote with --clear should work.
However, I ju
Hello,
Is it possible to clear the live backplot at the start of part program from
the part program? I am using Axis.
Thanks,
Mike
--
All the data continuously generated in your IT infrastructure
contains a definitive re
