By coincidence I was just working on adding a bit to the manual on components
and threads
and how to make it all work together.
John
On 2 Dec 2008 at 22:49, Tom wrote:
> Chris & Stephen,
>
> Thank you guys, that did it.
>
> Although I read the Hal manual and did the tutorials, I am still
> g
ubject: Re: [Emc-users] loadrt abs component not working
To: "Enhanced Machine Controller (EMC)"
Date: Tuesday, December 2, 2008, 6:58 PM
On Wed, Dec 03, 2008 at 01:48:34AM +, Tom wrote:
>
> Looking at the Halmeter pins/signals, the abs component shows up with 3
pins but
>
On Wed, Dec 03, 2008 at 01:48:34AM +, Tom wrote:
>
> Looking at the Halmeter pins/signals, the abs component shows up with 3 pins
> but
> integer values that appear on the abs.0.in pin never come out on the abs.0.out
> pin. Zip, nada, no output. Is is as if the abs component needs a parameter
Tom wrote:
>I am using the Mesa 5i20 & 7i33 DAC board combination to retrofit a Kasuga
>mill.
>I am controlling a VFD that takes the standard 0-10V speed reference plus start
>and reverse.
>I am currently working my way thru the problem of outputting a speed command
>/voltage signal that does not
I am using the Mesa 5i20 & 7i33 DAC board combination to retrofit a Kasuga mill.
I am controlling a VFD that takes the standard 0-10V speed reference plus start
and reverse.
I am currently working my way thru the problem of outputting a speed command
/voltage signal that does not switch to a negati
