Gentlemen,
When I start 5axis sim I can move to mdi and issue commands to
move the machine. If I change to manual mode and move the machine. I
cannot change back to mdi mode. The error tells me all axes need to be
homed.
The difference I see is in the first example the number of axis
position displays is equal to the number of axes shown in the axis
selection area of the manual mode. After moving the machine and then
moving to mdi mode the number of axes is equal to the total number of
axes specified in the .ini file.
When I move to manual mode and home all axes the only axes homed
are the axes in the selection area of the manual mode.
Where would I look to fix this?
thanks
Stuart
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
