Hello,
In the "Language Overview" section of the manual:
http://www.linuxcnc.org/docs/2.2/html/gcode_main.html#cha:Language-Overview
I'm seeing this line:
"A single program may be in a single file, or a program may be spread
across several files.".
However the only way I can see to make use o
I'm pretty sure it's reffered to as O words, my understanding is that it
should open a program and run it within a program, but ive never done it in
EMC.
On Fri, Mar 21, 2008 at 1:33 AM, rtwas <[EMAIL PROTECTED]> wrote:
> Hello,
>
> In the "Language Overview" section of the manual:
>
>
> http://w
rtwas wrote:
>Hello,
>
>In the "Language Overview" section of the manual:
>
>http://www.linuxcnc.org/docs/2.2/html/gcode_main.html#cha:Language-Overview
>
>I'm seeing this line:
>
>"A single program may be in a single file, or a program may be spread
>across several files.".
>
>
I suspect that
Hi,
It would indeed be a nice feature if one could use a script to
sequentially run a series of g-code files. :-)
Dave
On Mar 21, 2008, at 8:51 AM, Stephen Wille Padnos wrote:
> rtwas wrote:
>
>> Hello,
>>
>> In the "Language Overview" section of the manual:
>>
>> http://www.linuxcnc.org/docs/2
Dave Engvall wrote:
>Hi,
>It would indeed be a nice feature if one could use a script to
>sequentially run a series of g-code files. :-)
>
>
There is a script that runs a single g-code file. I'm sure it could be
extended to run more than one. it's called jdi.py, and it's available
somewher
ve Engvall" <[EMAIL PROTECTED]>
To: "Enhanced Machine Controller (EMC)"
Sent: Friday, March 21, 2008 12:47 PM
Subject: Re: [Emc-users] newb question: multiple cnc program over
multiple*.ngc files
> Hi,
> It would indeed be a nice feature if one could use a script
est code will be executed. If the file is loaded on demand,
> the test
> code will not be executed. That's a purely accidental consequence
> of how
> things have been defined, but it's still prety neat.
>
> Ken
>
> - Original Message -
> From: &qu
