On Monday, 7 March 2022 05:37:43 EST andy pugh wrote:
> On Mon, 7 Mar 2022 at 02:08, gene heskett wrote:
> > The thread is not a tapered thread, measureing 12.95mm in the threads
> > major diameter, and quite close to 1mm pitch, maybe .98mm?
>
> If the measurements are correct then it is not BSP
On Mon, 7 Mar 2022 at 02:08, gene heskett wrote:
> The thread is not a tapered thread, measureing 12.95mm in the threads
> major diameter, and quite close to 1mm pitch, maybe .98mm?
If the measurements are correct then it is not BSP either.
https://en.wikipedia.org/wiki/British_Standard_Pipe
On Monday, 7 March 2022 00:11:45 EST Thaddeus Waldner wrote:
> This might help. I have a large print of this hanging on the wall.
>
> https://ww2.gates.com/Turkey/file_save_common.cfm?thispath=Turkey%2Fdoc
> uments%5Fmodule=50101%5FE2%5FCOUPL%5FIDENT%5FCHART%2Epdf
Nice chart, saved it but no
This might help. I have a large print of this hanging on the wall.
https://ww2.gates.com/Turkey/file_save_common.cfm?thispath=Turkey%2Fdocuments%5Fmodule=50101%5FE2%5FCOUPL%5FIDENT%5FCHART%2Epdf
> On Mar 6, 2022, at 8:08 PM, gene heskett wrote:
>
> Greetings all;
>
> I have obtained a
Greetings all;
I have obtained a couple 0-10 psi 3 wire sensors I'd like to use to
control a pwmgen to regulate the low air pressure a mister uses, as just
a couple lbs is plenty. Useing a 12 volt supply driving 5 of those teeny
compressors I bragged about finding.
But it has an unusual (to