A quick google of it shows that 2.6v is typically the breaking point for
failure. Replace the battery.
- Original Message -
From: "chris"
To: "Enhanced Machine Controller (EMC)"
Sent: Thursday, October 22, 2015 2:23:05 PM
Subject: Re: [Emc-users] some weird issu
On Thursday 22 October 2015 20:30:24 chris wrote:
> Yeah changing the battery fixed that. Still don't understand why
> shutting down doesn't turn off the computer power like it used to. Or
> why the display in axis is jerky now when panning and zooming.
>
> Chris
I expect a lot of that would be f
On 10/22/2015 1:35 PM, Mark Wendt wrote:
Chris,
You might also check out the setting about local time as shown here
https://wiki.debian.org/DateTime#Hardwareclock_.2F_Systemtime_.2F_Dual_Boot
My computer would reset to UTC everytime I would reboot until I fixed it
with the LOCAL change.
Jim
>
On Thursday 22 October 2015 13:34:01 chris wrote:
> I've got some weird issues that have popped up recently. One of the
> first things that I noticed is that the is when I pan the image around
> in the axis screen it's really jerky, which is how it used to be, then
> after updating it got to where
On Thu, Oct 22, 2015 at 2:23 PM, chris wrote:
> I did check that yesterday. I didn't have a replacement for it so I checked
> the
> voltage on the one that was in there and it was still around 2.6v. I'm not
> sure
> what the range on those is before they start causing issues. But you're
> right
I did check that yesterday. I didn't have a replacement for it so I checked the
voltage on the one that was in there and it was still around 2.6v. I'm not sure
what the range on those is before they start causing issues. But you're right, I
probably should do that. I've had this particular desktop
Am Donnerstag, 22. Oktober 2015 schrieb chris:
> I've got some weird issues that have popped up recently. One of the first
> things
> that I noticed is that the is when I pan the image around in the axis screen
> it's really jerky, which is how it used to be, then after updating it got to
> where
I've got some weird issues that have popped up recently. One of the first things
that I noticed is that the is when I pan the image around in the axis screen
it's really jerky, which is how it used to be, then after updating it got to
where it was really smooth, now it's back to acting like that.
