Re: [etherlab-users] CX CPU as Master Linux Slave

don`t know if this show you something more Thank you very much Best regards - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - David Jiménez Mejías -Original Message- From: Graeme Foot <graeme.f...@touchcut.com> To: David Jiménez Mejías <david

[etherlab-users] CX CPU as Master Linux Slave

PDOs is with the slave CPU on config mode. I'm studing this procedure from zero, then, if there is someone with some informatuion about it I will so grateful. Thanks in advance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ​​​ David Jiménez Mejías

Re: [etherlab-users] Initializing CanOpen Master Module EL6751-0010

working? Thank you in advance Best regards - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - David Jiménez Mejías - Gran Telescopio de Canarias S.A Ingeniero de Operación / Operation Engineer -Original Message- From: Richard Hacker <h...@igh.de> To: &qu

Re: [etherlab-users] Beckhoff 6731-0010 initialization

rning: Failed to set priority: %s\n", strerror(errno)); #endif sa.sa_handler = signal_handler; sigemptyset(_mask); sa.sa_flags = 0; if (sigaction(SIGALRM, , 0)) { fprintf(stderr, "Failed to install signal handler!\n"); return -1; } print

[etherlab-users] Beckhoff 6731-0010 initialization

. I'm not sure is there is the correct information to know whats happens, tell me any doubt. Thank you very much King regards - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - David Jiménez Mejías - Gran Telescopio de Canarias S.A Ingeniero de Operación / Operation

[etherlab-users] Initializing CanOpen Master Module EL6751-0010

s type of modules? Thank you very much Best regards ​ - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - David Jiménez Mejías - Gran Telescopio de Canarias S.A Ingeniero de Operación / Operation Engineer -- ADVERTENCIA: Sobre la privacidad y cumplimiento de l

Re: [etherlab-users] Make Module Errors

-- From: Patrick Brünn <p.bru...@beckhoff.com> To: David Jiménez Mejías <david.jime...@gtc.iac.es>, "etherlab-users@etherlab.org" <etherlab-users@etherlab.org> Date: Fri, 16 Oct 2015 09:44:31 + Subject: RE: [etherlab-users] Make Module Errors Hi David, with Kerne

Re: [etherlab-users] Make Module Errors

Sorry for the reply before, don't take it on care. All just done correctly. Thanks - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - David Jiménez Mejías - Gran Telescopio de Canarias S.A Ingeniero de Operación / Operation Engineer Centro de Astrofísica de La Palma

[etherlab-users] Make Module Errors

Thank you very much Best regards David J.M - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - David Jiménez Mejías - Gran Telescopio de Canarias S.A Ingeniero de Operación / Operation Engineer Centro de Astrofísica de La Palma, C.P 38718, Breña Baja S/C de