Dear all,
I have tried to bring up the Omron ethercat coupler with some digital inputs
and outputs modules. With the help of the example code I can read out the value
from digital input modules. But with the digital output module, I always get
the error msg: "AL status message 0x001B: "Sync ma
upler
> #define OMRON_OD3256 0x0001, 0x00133256 //Omron (4) digital output
Why not the OMRON products have the same id ?
发件人： jiangjiang kai
发送时间： 2018-11-03 15:24
收件人： etherlab-users@etherlab.org
主题： [etherlab-users] AL status message 0x001B: "Sync manager watchdog" error
wit
e
case.
You're also not reading any of the slave's inputs. This usually doesn't
trigger a watchdog error, but again it might depend on the specific slave's
defaults.
From: jiangjiang kai
Sent: Saturday, 3 November 2018 20:25
To: etherlab-users@etherlab.org
Subject: [etherlab-u
