-Original Message-
From: Gavin Lambert [mailto:gav...@compacsort.com]
Sent: maandag 11 mei 2015 10:01
To: 'Fredriek Vanneste'
Cc: etherlab-users@etherlab.org
Subject: RE: [etherlab-users] EtherLab with Omron Accurax PREOP- OP fail
On 11 May 2015 18:32, quoth Fredriek Vanneste
-Original Message-
From: Gavin Lambert [mailto:gav...@compacsort.com]
Sent: maandag 11 mei 2015 0:47
To: 'Fredriek Vanneste'; 'Richard Hacker'
Cc: etherlab-users@etherlab.org
Subject: RE: [etherlab-users] EtherLab with Omron Accurax PREOP- OP fail
On 9 May 2015 02:29, quoth
On 9 May 2015 02:29, quoth Fredriek Vanneste:
If the same thing occurs when you try to run your application code,
then you
need to check that you're calling ecrt_slave_config_dc and passing it
the correct parameters (as specified by the slave vendor).
I get the same problem as with the
-Original Message-
From: Gavin Lambert [mailto:gav...@compacsort.com]
Sent: vrijdag 8 mei 2015 10:26
To: 'Fredriek Vanneste'; 'Richard Hacker'
Cc: etherlab-users@etherlab.org
Subject: RE: [etherlab-users] EtherLab with Omron Accurax PREOP- OP fail
On 8 May 2015 02:37, quoth
On 8 May 2015 02:37, quoth Fredriek Vanneste:
Something else I forgot to mention before is that the Omron Drive gives
an
error message when I try to go to OP state, saying:
Communication Setting Error.
[...]
[ 185.205688] EtherCAT 0: Using slave 0 as DC reference clock.
[
