Hi Carlos,
Did you finally found a solution to your problem, because I faced something
similar with an EL7211 ?
Philippe Leuba
___
etherlab-users mailing list
etherlab-users@etherlab.org
http://lists.etherlab.org/mailman/listinfo/etherlab-users
Hello Florian,
One question, why is this necessary?, without this option i can work
with many different modules, what is the difference with this module?
Thanks a lot in advance
Regards
A 2014-05-22 09:22, Florian Pose escrigué:
Hello,
On Thu, May 22, 2014 at 09:15:04AM +0200, Carlos Jimén
Hello,
On Thu, May 22, 2014 at 09:15:04AM +0200, Carlos Jiménez Leal wrote:
> I was working with the latest version of ethercat master, and this
> option don't appear on the configure, but this option appear in the
> ethercat-1.5.2.
the latest version is in the stable-1.5 branch. Please use this
Hello Florian,
I was working with the latest version of ethercat master, and this
option don't appear on the configure, but this option appear in the
ethercat-1.5.2.
I will try with this version again, thank you again.
Regards
A 2014-05-22 08:51, Carlos Jiménez Leal escrigué:
Hello Florian
Hello Florian,
Thank you for your answer, but i can't understand you, you mean
--enable-sii-asign at configure time?, it's not an option of configure.
What do you mean?
Thank you for your time, regards
A 2014-05-21 18:07, Florian Pose escrigué:
Hello!
On Wed, May 21, 2014 at 04:21:58PM +020
Hello!
On Wed, May 21, 2014 at 04:21:58PM +0200, Carlos Jiménez Leal wrote:
> Anyone have any idea what I can try?
Did you --enable-sii-assign?
--
Best regards,
Florian Pose
http://etherlab.org
___
etherlab-users mailing list
etherlab-users@etherlab.
Hello,
I tested with the latest version of the master but still fails in the
same way, I have activated the debug mode to get more traces.
[ 1306.804022] EtherCAT 0: Link state changed to DOWN.
[ 1306.808089] EtherCAT ERROR 0-1: Failed to receive AL state datagram:
Datagram error.
[ 1306.812
Hello Henry, thank you for your answer,
I am not using the latest version, I use the 1.5.2. I'll be down the
latest version and try again
Regards
A 2014-05-20 18:59, Henry Bausley escrigué:
Are you using the latest version of the stack? I believe this was
related to writing a 1 to address 0
Are you using the latest version of the stack? I believe this was
related to writing a 1 to address 0x500 in
ec_fsm_slave_config_state_boot_preop and was fixed.
On Tue, 2014-05-20 at 13:30 +0200, Carlos Jiménez Leal wrote:
> Hello,
>
> I'm trying to run the Beckhoff EL7201 drive with Etherlab
Hello,
I'm trying to run the Beckhoff EL7201 drive with Etherlab Master, but
when starting the master, the module does not pass to PREOP state and
remains in INIT state.
This is the output of dmesg:
[ 8402.649526] EtherCAT 0: Link state of ecm0 changed to UP.
[ 8402.653599] EtherCAT 0: 4 sl
10 matches
Mail list logo
