Thank you for your answer Dr. Hagemeister,
For clarification, yes, I'm using an application over the EtherCAT
master, and I have used this application with a lot of Beckhoff modules
many times.
I check this way to upload the EEPROM but I think this is not what I
need, because I want to apply
Hallo Carlos,
for updating the EEPROM see: http://etherlab.org/en/ethercat/faq.php
Just for clarification ... you need a running application for
PDO-access. You can't do that with only with the EtherCat-Master...
Regards Wilhelm.
Am 28.09.2016 um 12:01 schrieb carlos_jimenez:
Hello,
I hav
Hello,
I have tried applying the configuration to the watchdog, but I get the
same result. I can read a correct value on input through the ethercat
tool upload (with SDOs), but I cannot get this value with PDOs, I
receive just 0.
The EEPROM configuration should be done by the vendor, but it is
Hello Gavin,
Thank you very much for ypur answer, I will try with the watchdog :)
Best regards
El 28-09-2016 00:49, Gavin Lambert escribió:
On 28 September 2016 02:57, quoth carlos_jimenez:
I have some problems to read values from a Gantner modules, and I have
the configuration file of this m
On 28 September 2016 02:57, quoth carlos_jimenez:
> I have some problems to read values from a Gantner modules, and I have
> the configuration file of this modules, but there are some strange tags for
> me, I don't know how to use this tags with the master.
>
> ...
>
>
>
> 100
Hello,
I have some problems to read values from a Gantner modules, and I have
the configuration file of this modules, but there are some strange tags
for me, I don't know how to use this tags with the master.
...
100
2000
...
25000
100
20
