Linux version 2.6.10T1 ([EMAIL PROTECTED]) (gcc version 3.3.4) #2 SMP Tue Jan 4 12:38:33 PST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003bef0000 (usable) BIOS-e820: 000000003bef0000 - 000000003bef3000 (ACPI NVS) BIOS-e820: 000000003bef3000 - 000000003bf00000 (ACPI data) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) 62MB HIGHMEM available. 896MB LOWMEM available. found SMP MP-table at 000f57d0 On node 0 totalpages: 245488 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 225280 pages, LIFO batch:16 HighMem zone: 16112 pages, LIFO batch:3 DMI 2.3 present. ACPI: RSDP (v000 RS300 ) @ 0x000f7330 ACPI: RSDT (v001 RS300 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef3000 ACPI: FADT (v001 RS300 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef3040 ACPI: MADT (v001 RS300 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x3bef6940 ACPI: DSDT (v001 RS300 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 20 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 20 ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) Using ACPI for processor (LAPIC) configuration information Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 I/O APIC #2 Version 17 at 0xFEC00000. Enabling APIC mode: Flat. Using 1 I/O APICs Processors: 2 Built 1 zonelists Kernel command line: auto BOOT_IMAGE=Linux ro root=301 hde=noprobe hdf=noprobe hdg=noprobe ide_setup: hde=noprobe ide_setup: hdf=noprobe ide_setup: hdg=noprobe mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Initializing CPU#0 CPU 0 irqstacks, hard=c0528000 soft=c0520000 PID hash table entries: 4096 (order: 12, 65536 bytes) Detected 3208.448 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 968092k/981952k available (2891k kernel code, 13364k reserved, 1084k data, 224k init, 64448k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 6356.99 BogoMIPS (lpj=3178496) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 monitor/mwait feature present. using mwait in idle threads. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU0: Intel P4/Xeon Extended MCE MSRs (12) available CPU0: Thermal monitoring enabled Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. CPU0: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03 per-CPU timeslice cutoff: 2925.88 usecs. task migration cache decay timeout: 3 msecs. Booting processor 1/1 eip 2000 CPU 1 irqstacks, hard=c0529000 soft=c0521000 Initializing CPU#1 Calibrating delay loop... 6406.14 BogoMIPS (lpj=3203072) CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 monitor/mwait feature present. CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: Intel P4/Xeon Extended MCE MSRs (12) available CPU1: Thermal monitoring enabled CPU1: Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 03 Total of 2 processors activated (12763.13 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 pin1=2 pin2=0 checking TSC synchronization across 2 CPUs: passed. Brought up 2 CPUs CPU0: domain 0: span 03 groups: 01 02 domain 1: span 03 groups: 03 CPU1: domain 0: span 03 groups: 02 01 domain 1: span 03 groups: 03 NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfb6e0, last bus=2 PCI: Using configuration type 1 mtrr: v2.0 (20020519) Linux Plug and Play Support v0.97 (c) Adam Belay PnPBIOS: Scanning system for PnP BIOS support... PnPBIOS: Found PnP BIOS installation structure at 0xc00fc0f0 PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0xc120, dseg 0xf0000 PnPBIOS: 13 nodes reported by PnP BIOS; 13 recorded by driver SCSI subsystem initialized usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1 PCI: Transparent bridge - 0000:00:14.4 PCI: Using IRQ router default [1002/5833] at 0000:00:00.0 PCI->APIC IRQ transform: (B0,I13,P0) -> 19 PCI->APIC IRQ transform: (B0,I19,P0) -> 19 PCI->APIC IRQ transform: (B0,I19,P0) -> 19 PCI->APIC IRQ transform: (B0,I19,P0) -> 19 PCI->APIC IRQ transform: (B0,I20,P0) -> 18 PCI->APIC IRQ transform: (B0,I20,P1) -> 18 PCI->APIC IRQ transform: (B1,I5,P0) -> 16 PCI->APIC IRQ transform: (B2,I3,P0) -> 16 PCI->APIC IRQ transform: (B2,I3,P0) -> 16 PCI->APIC IRQ transform: (B2,I4,P0) -> 17 PCI->APIC IRQ transform: (B2,I9,P0) -> 17 PCI->APIC IRQ transform: (B2,I10,P0) -> 18 Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1104855429.668:0): initialized highmem bounce pool size: 64 pages Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]). Initializing Cryptographic API isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found lp: driver loaded but no devices found Linux agpgart interface v0.100 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP(,...)] lp0: using parport0 (interrupt-driven). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered elevator: using anticipatory as default io scheduler FDC 0 is a post-1991 82077 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx Probing IDE interface ide0... hda: Maxtor 6Y160P0, ATA DISK drive Probing IDE interface ide1... hdc: LITE-ON DVDRW LDW-851S, ATAPI CD/DVD-ROM drive Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 320173056 sectors (163928 MB) w/7936KiB Cache, CHS=19929/255/63 hda: cache flushes supported hda: hda1 hdc: ATAPI 40X DVD-ROM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 libata version 1.10 loaded. ohci1394: $Rev: 1223 $ Ben Collins <[EMAIL PROTECTED]> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17] MMIO=[e0022000-e00227ff] Max Packet=[2048] ieee1394: raw1394: /dev/raw1394 device initialized ehci_hcd 0000:00:13.2: PCI device 1002:4345 (ATI Technologies Inc) ehci_hcd 0000:00:13.2: irq 19, pci mem 0xe1105000 ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected USB Universal Host Controller Interface driver v2.2 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Initializing USB Mass Storage driver... usbcore: registered new driver usb-storage USB Mass Storage support registered. usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1 Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC). ALSA device list: No soundcards found. NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack version 2.1 (7671 buckets, 61368 max) - 304 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost <[EMAIL PROTECTED]>. http://snowman.net/ projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 Starting balanced_irq ReiserFS: hda1: found reiserfs format "3.6" with standard journal ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e01800006091f6] ReiserFS: hda1: using ordered data mode ReiserFS: hda1: journal params: device hda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda1: checking transaction log (hda1) ReiserFS: hda1: Using r5 hash to sort names VFS: Mounted root (reiserfs filesystem) readonly. Freeing unused kernel memory: 224k freed eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter PrefPort:A RlmtMode:Check Link State eth0: network connection up using port A speed: 100 autonegotiation: yes duplex mode: full flowctrl: symmetric irq moderation: disabled scatter-gather: enabled
-- Let's call it an accidental feature. -- Larry Wall _______________________________________________ EUGLUG mailing list euglug@euglug.org http://www.euglug.org/mailman/listinfo/euglug