http://www.bmwblog.com/2014/09/24/installing-level-2-charger-electric-car/
Installing a Level 2 Charger for an electric car
How-To | September 24th, 2014 by Chuck Vossler

[image  
http://www.bmwblog.com/wp-content/uploads/81hOYQDnUCL._SL1500_.jpg

http://www.bmwblog.com/wp-content/uploads/BMW-carport-03.jpg

http://www.bmwblog.com/wp-content/uploads/installing-electric-car-charger-9.jpg

http://www.bmwblog.com/wp-content/uploads/installing-electric-car-charger-14.jpg

http://www.bmwblog.com/wp-content/uploads/installing-electric-car-charger-8.jpg

http://www.bmwblog.com/wp-content/uploads/installing-electric-car-charger-3.jpg

http://www.bmwblog.com/wp-content/uploads/installing-electric-car-charger-1.jpg

http://www.bmwblog.com/wp-content/uploads/installing-electric-car-charger-2.jpg

http://www.bmwblog.com/wp-content/uploads/installing-electric-car-charger-19.jpg

http://www.bmwblog.com/wp-content/uploads/installing-electric-car-charger-16.jpg


video
http://www.youtube.com/watch?v=QSXsyFsDVec
BMW Designworks Solar Carport and BMW i Wallbox Pro
bimmerblog  May 3, 2014
As we reported on last November, BMW is rolling out their 360º Electric
Program (http://www.bmwblog.com/2013/11/14/bmw...) to coincide with the
launch of the BMW i cars.
]

Ironically, it was easier to decide to purchase an all electric Solar Orange
BMW i3 than it was to decide on which Level 2 Charger to buy. BMW sells a
very nice looking charger, the BMW i Charging Station, for $1,080 and as
with all other chargers installation is extra.

However, it was the BMW Wallbox Pro which BMWBLOG reported on from the BMW
i8 launch back in April that I really, really wanted.

I was super excited about this particular one because we have a newly
installed 12kW solar system in our house and I relished the idea of being
able to program where the electricity was to come from to charge our Solar
Orange i3. Sadly, this fantastic device is still not available and now word
on when it will be.

Installing a Level 2 Charger for an electric car

So Many Options In The World Of EV Chargers

When looking at an electric car charger, it helps to know a bit of the
lingo. EV nuts are very particular about their verbiage. Though commonly
called a Level 2 Charger, the proper term is Electric Vehicle Service
Equipment (EVSE) because the actual AC to DC conversion occurs on board the
EV itself. It will be hard to break the public of the habit of calling them
Car Chargers, as that’s what manufacturers call them.

Hitting on the basics of electricity supplies, in the United States a 110V
is a common household plug, and 240V is what is used for household electric
ovens, dryers and air conditioning units. A 240V outlet can charge an
electric vehicle twice as fast as the 110V. A Level 1 Charger, which uses a
household 110V current, is good when you are in a pinch – BMW even calls it
an “occasional charger” so you get the hint that you need a Level 2 Charger.

When it gets to where electricity meets the EV, the SAE J1772 Charging plug
is standard for all electric vehicles except the Tesla cars which have a
proprietary charging plug. Thanks Elon!

Why Do I Need A Level 2 Charger?

Installing a Level 2 Charger for an electric car

Level 2 Units can charge up to 7.2 kW and pull 30A, and need to be installed
on a 40A circuit with 8 gauge wire. There are DC chargers too but they are
480 volts and cost around $8,000. Thankfully the Rapid DC chargers are
becoming more common at commercial charging sites on the East and West
coast. The DC Charger, CHAdeMO aka a Level 3 Charger, can pump a stunning
62.5 kW of direct current right into the battery.

On the BMW i3, it does require an optional $700 factory connector. I am told
that this is factory installed only, if you don’t get it at manufacturing of
your vehicle, you cannot retrofit it.

There are more Level 2 Chargers available than I would have thought. See our
table for the most popular ones out there.

Charging Stn    BMW     Bosch   Bosch   CCreek  GE      Siemens 
                i       EL51253 EL51254 HSC-40  Watt    VC30BLK 
Amperage        30A     30A     30A     32A     30A     30A 
Cable Length    25'     18'     25'     25'     18'     20' 
Output Power    7.2kW   7.2kW   7.2kW   7.7kW   7.2kW   7.2kW 
Self Contained  Yes     Yes     Yes     No      Yes     Yes 
Cost            $1080   $571    $737    $590    $599    $799 

BMW i Charging station is 30-40% more expensive than all the other units, so
it was immediately at a disadvantage. As Bosch is the manufacturer of BMW’s
i Charging Station, I was immediately drawn to it. Bosch’s charger is a much
smaller unit with a center holster that docs the J177A Charging Plug. The
unit is available with a 18 ft or a 25 ft long cord.

The Siemens unit has a very German efficient layout while the GE one looks
just like the one that Porsche uses for their plug-in hybrid cars. There’s
also a very robust unit from Clipper Creek, the HSC-40 but I didn’t like the
lack of contained plug doc and it’s rather unattractive compared to the
other units.

Installing a Level 2 Charger for an electric car

The Bosch charger has a LED indicator flashing blinking green when you are
charging. It also has an unit On/Off switch on the side to keep it from
using any power when not in use. Bosch offers a 3 year warranty when
installed by Bosch or 1 year if you do it with your own electrician.

One of the main reasons I went with the Bosch was itself contained connector
dock which looks better and protects it from accidental drops. The cord also
neatly stows wrapped around the unit. The size of the charger is on the
small side: 16” by 14” x 5”. The BMW charging unit, on the other hand, is
the size of a pay phone, if you remember what those look like.

Ultimately we elected to go with the Bosch 25’ as everything I’ve read said
get the longest cord you can.

Installation of Bosch EL-51254

Installing a Level 2 Charger for an electric car Installing a Level 2
Charger for an electric car Installing a Level 2 Charger for an electric car

Level 2 Chargers require a dedicated 40A 240V circuit. Here is where costs
for installation can be all over the map. If you don’t have enough capacity
in your house, you need to upgrade the whole electric service to the house.
Ka-ching!

In my opinion, you need at least 200A service to your house to be able to
add a 40amp circuit. Some older houses only have 100amp service. The second
biggest cost determinate is how far you have to run the wires from the
breaker box. In my case, it was about 30 feet through two finished walls and
a crawl space above the garage. If you have an unfinished wall where your
breaker box is, and you’re just gonna pop-out the side and place the charger
right there, it’ll cost much less.

Installing a Level 2 Charger for an electric car

Take home lesson is: not all 240V circuits are the same. I had this
grandiose plan of installing the whole thing myself, until I learned I
needed 8 Gauge wire. I had planned on just using the wire from my 2-Post
lift in the garage by redirecting it but this is only on a 20amp circuit.
Seriously, unless you really know what you are doing, call a professional.
I’ve done 110 circuits myself in the past but still called in a professional
just to make sure I didn’t kill a brand new car.

NEMA 14-50

Good grief, the EV terms just don’t end.

NEMA 14-50 was not a term I was familiar before this electric journey I’ve
undertaken. Anyway, it’s the way I decided to get power to my Level 2
Charging unit. The benefits of connecting a Level 2 charger this way are
multiple. The biggest of which is you can simply unplug the device if you
move versus call an electrician.

A bonus is when a buddy with a Tesla Model S shows up in your drive way, you
can unplug your charger and have the Tesla plug directly into the NEMA
14-50. Same goes for the in-laws RV or even a welder. If you hardwire your
Level 2 Charger, you loose all that flexibility. Once my electrician had the
14-50 receptacle all wired up, I sent him on his way with a check for
$318.60 and I finished the rest of the install.

Installing a Level 2 Charger for an electric car Installing a Level 2
Charger for an electric car

In order to connect our Bosch Level 2 charger, I had to add a NEMA Plug
which was not included. It cost $23 from Lowes, and can handle 50A. A
“range” plug they call it.

How hard could it be to install? Well, it sucks!

There’s no color coded labels to tell you where to put your white/red/black
and green wires in the back panel of the Bosch unit. In fact, there are only
three spots for wires and I have four hanging off the plug. Hmmm. I pull out
instruction manual and it says L1, L2 and N. Hmmm again. Maybe I shouldn’t
have sent the electrician away.

No fear. I’ll call Bosch.

I get a someone on the phone from tech support and, I am not making this up,
they say “call an electrician.” I ask, “I am on the phone with tech support
for an electric car charger and you cannot tell me how to deliver
electricity to it?” They answer: call an electrician. Nuts. I love the
Untied States of Attorneys.

Installing a Level 2 Charger for an electric car

I hung up and saved my choice explicatives for the crickets in the garage.
No fear, because I tapped the BMW i3 Facebook Group and rapidly got the
answer I wanted. L1 and L2 are red/black, and N was green. I am just telling
you what I did and electric codes could be different in your area. I had to
drill out the bottom plastic section of the Bosch unit so the wires could
come straight out of the bottom of the unit. It required a fancy $5 1” drill
bit from my hardware store.

Installing a Level 2 Charger for an electric car Installing a Level 2
Charger for an electric car

Hanging the unit was simple. A level two number 8 wood screws went into a
stud to secure the metal bracket to the wall and then three torx T30 screws
holding the unit to the metal bracket. Then plug the unit into the NEMA
14-50 plug. Since our BMW i3 wasn’t yet delivered to our dealer, they were
kind enough to let me test drive one and make sure the install went fine.
Read our experience of BMW’s 3 day extended test drive here.

There are lots of choices for Level 2 EV chargers and lots of ways to
install them. This was a description of my journey which one worked for me
and why. It also gives you an idea of what installation can be like.
Installation charges can vary from a couple hundred dollars to over a
thousand if you need to upgrade your electric service.

COSTS:
Bosch EL-5124 Level 2 Charger – Amazon for $792.95 including tax/shipping.

NEMA Pig tail for $23
Electrician bill of $318.60 for 40A circuit, 35’ of 8 Guage of wire, and
labor

TOTAL: $1,134.55
[© bmwblog.com]
...
http://www.pluginnow.com/sites/default/files/EV13-135_0.pdf
Bosch EVSE, EL51254: Power Max 30A / 25' Cord 
...
http://www.clippercreek.com/store/product/charging-station-lcs-20-level-2/
$395 ClipperCreek EVSE, LCS-20 15A




For EVLN posts use:
http://www.evdl.org/archive/index.html#nabble+template%2FNamlServlet.jtp%3Fmacro%3Dsearch_page%26node%3D413529%26query%3Devln%26sort%3Ddate

http://cleantechnica.com/2014/09/21/nissan-60000-electric-cars-us/
Nissan Has 60,000 Electric Cars In US

http://insideevs.com/bmw-i3-support-vehicle-usa-pro-cycling-challenge-2014-video/?utm_source=feedburner&utm_medium=feed&utm_campaign=Feed%3A+InsideEvs+%28Inside+EVs%29
BMW i3 As Support EV @USA Pro Cycling Challenge 2014 (video)

http://anewscafe.com/2014/09/22/shasta-wine-village-breaks-ground-2015-opening-day-goal/
Shasta Wine Village Breaks Ground & Cheers Abound For Their EVSE
+
EVLN: Nissan e-NV200 EV gets a VIP makeover


{brucedp.150m.com}



--
View this message in context: 
http://electric-vehicle-discussion-list.413529.n4.nabble.com/EVLN-1135-EVSE-793Bosch-EL51254-23Pigtail-319Electrician-video-tp4671864.html
Sent from the Electric Vehicle Discussion List mailing list archive at 
Nabble.com.
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

Reply via email to