Hi David and All,
You are correct likely for a new balanced battery set started
at exactly the same charge. But after a while the differences will get larger
and I'll likely be using used Leaf cells made into 100-200amphr packs which may
work with only 100ma load on the highes
On Wed, Apr 9, 2014 at 8:12 AM, jerry freedomev wrote:
> Hi Cor and All,
>
> Thanks for the info. Sounds good for an E bike 24vdc nom pack
> but too little balancing for a 100-200 amphr ones I want.
>
How do you know? That would be more than enough for my 200Ah TS pack.
Unless you
Hi Cor and All,
Thanks for the info. Sounds good for an E bike 24vdc nom pack but
too little balancing for a 100-200 amphr ones I want.
I'm looking at either Leaf or Volt cells/batteries because they
seem the low cost way and a low parts count BMS to keep them alive fo
Jerry,
The datasheet says it is a monitor/balancer.
Balance current is 100mA and what I understand from
the description is that a single external resistor is
multiplexed between the high cells, so worst case if you have
1 low cell and 6 high cells, each high cell effectively
is connected to the re
