I have been using NS 4.79 for 3 or 4 days and have not seen anything
more
flaky than NS 4.78 nor has it crashed on me. It's a keeper.
Bill
Jose Luis Vazquez Gonzalez wrote:
I am using NS 6.1 and I have to say it is quite good, nothing to do with 6.0x
series. Stable and fast. It seems the
Hi,
I have Mandrake 8.1 installed and have the same problem with dictd
as I had with Mandrake 8.0. It works fine while I'm online but
refuses to work while offline. Below is my /etc/dict.conf,
/etc/dictd.conf files and ifconfig lo.
Searches on the web show others have this problem. But to
Hi,
When my system boots, it comes up using vgafb.
How can I change this to use matroxfb?
Bill
Mandrake 8.1
XFree86 4.1.0-21mdk
Matrox G400 w/32MB SDRAM
--
Quando Omni Flunkus Moritati
(When all else fails, play dead!)
Want to buy your Pack or Services from MandrakeSoft?
Go to
[EMAIL PROTECTED] wrote:
All,
I am sorry to have to post this email to this mailing list, but it is the only
Mandrake list I subscribe to.
I purchased the 8.1 CDs from MandrakeStore about 5 weeks ago (the money was
charged to my Credit Card accordin to the statement), and MandrakeStore
Martin Ignacio lange wrote:
Hey,
Does anybody knows how to put two monitors with linux. Do I explain
myself? I want two monitors in one computer.
Thanks
Martin
Good luck if you can get to fit in one computer.g
Check google for xinerama.
Bill
--
Quando Omni Flunkus Moritati
be prepared for this with 8.1. other msgs on this subject
suggests using devfs is for adding a new feature for the kde desktop.
not nice for non-kde users.
bill
On Thursday 27 September 2001 02:24, you wrote:
My /dev/cdrom had changed (after update to 8.1-RC1) to
/dev/cdrom0 - cdroms/cdrom0
http://www.pclinuxonline.com/ reports that mandrake 8.1 rc1 has been upgraded
to include KDE 2.2.1 on Mandrake sites. Apparently, no change in the filename
was used.
Bill
On Wednesday 19 September 2001 20:21, you wrote:
Does anyone know if the kde 2.2.1 will make it into the mandrake 8.1
Hi,
When my system boots, it comes up vgafb. How can I change this to
use matroxfb?
Bill
Mandrake 8.0
XFree86 4.1.0
Matrox 400
--
Quando Omni Flunkus Moritati
(When all else fails, play dead!)
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Supermount and this kernel works fine with my cdrom drive, zip drive
and floppy disk drive. Actually, my CD drive is a dvdrom drive. How
do I set up fstab to detect both a dvd or cdrom?
Bill
--
Quando Omni Flunkus Moritati
(When all else fails, play dead!)
Want to buy your Pack or Services
Bill,
Where are find 2.4.8-18mdk ?
Regards,
Leo Hon
Bill Thompson wrote:
Supermount and this kernel works fine with my cdrom drive, zip drive
and floppy disk drive. Actually, my CD drive is a dvdrom drive. How
do I set up fstab to detect both a dvd or cdrom?
Bill
--
Quando
DataChannel wrote:
What does it mean when probable hardware bug: clock timer configuration
lost - probably a VIA686a motherboard. scrolls up in my logs at random
intervals between once every 10 seconds to once every 45 minutes on a
motherboard (GA-5AX) that doesn't have a VIA chipset on a
Hi,
Friday, technicians will be at my home to do a cable modem
installation. The software provided is ppoe from Network
TeleSystems, Inc. I will be using a ZyXEL Prestige 941 cable modem
and a nic card with a RealTek 9139C chip. I'm using Mandrake 8.0,
2.4.7-14mdk kernel and WindowMaker 0.65.1.
PPPOE installed?
(So far, Cox@Home hasn't switched to using such a system. Thank
whatever diety as appropriate.)
Bill Thompson wrote:
Hi,
Friday, technicians will be at my home to do a cable modem
installation. The software provided is ppoe from Network
TeleSystems, Inc. I
Ron Johnson wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Monday 20 August 2001 21:49, Bill Thompson wrote:
Hi,
[snip]
Two questions - how can I setup switching between my dial-up modem
and the cable modem.
In /etc/sysconfig/network-scripts, the scripts ifup-ppp
who wished to do so.
Actually, the version of PPOE supplied by my ISP was a RedHat 5.2 rpm
binary!! I found the source that compiled without incident under MDK
8.0.
Bill Thompson wrote:
Hi,
Friday, technicians will be at my home to do a cable modem
installation. The software
by
anybody who wished to do so.
Bill Thompson wrote:
Hi,
Friday, technicians will be at my home to do a cable modem
installation. The software provided is ppoe from Network
snip
--
Steve - Toronto ICQ 35454764
Give the 8139too driver a try.
Bill
Darcy Brodie, CJL wrote:
A word of caution with the rtl8139. They work well with Mandrake 7.2, but the
drivers that are available at this time for the rtl8139 cards do not work with
Mandrake 8.0, and i have been unable to locate any drivers for the
I went throught the following drill last week and was successful. Get
http://azz.us-lot.org/kernel-drm-4.1.0.tar.gz and compile using:
make linux (or something like that)
The resulting .o files replace those in
/lib/modules/2.4.5-3mdk/kernel/drivers/char/drm.
Note the i810 module does not
David E. Fox wrote:
I went throught the following drill last week and was successful. Get
http://azz.us-lot.org/kernel-drm-4.1.0.tar.gz and compile using:
make linux (or something like that)
Actually, 'xmkmf ; make -f Makefile.linux'.
'make -f Makefile.linux' alone also works.
Hi,
I downloaded and installed viewperf from a Mandrake
ftp site of unsupported files. Can any one tell me
where to install the AWadvs, DRV, DX, Light, ProCDRS
and MedMCAO data files?
Thank,
Bill
--
From the shores of Khlong YaiPhuan, Bangkok, Thailand...
Hi,
I'm getting a message on the console terminal (non-X) that is really
getting to me. Has anyone any tips on how to get rid of it.
Here's the message:
probable hardware bug: restoring chip configuration.
probable hardware bug: clock timer configuration lost - probably a
VIA686a
motherboard.
Anyone know which rpm package for Mandrake 8.0 has ntpdate?
Thanks,
Bill
some of the rpm files at ftp://ftp.eastwind.net/pub/mirrors/texstar/
gives the error:
anacron
##
var/tmp/rpm-tmp.48227: fg: no job control
execution of anacron-2.3-7mdk script failed, exit status 1
running 'rpm -q
donald hinds wrote:
Is it really true?
I'm the ONLY one to try and install a USB modem in LM-7.2?
Since no one has an answer, it seems it must be so.
Don ;-(
http://www.signalground.com/article/3160886097 is an article on using
the
D-Link DSB-560 USB modem with Linux. A
Hi,
I've lost my way trying to get the matroxfb framebuffer to work
correctly
when booting up on a non-graphics logon. I'm using the non-LM 2.4 kernel
with LM 7.2. Is matroxfb_base the correct module to use? If not, which
of the kernel modules should I use? And how - so that the Tux logo is
seen
[EMAIL PROTECTED] wrote:
I've d/l'ed and decompressed the 2.4 Kernal to /root/linux. When I try to
make config, it tells me "No such file or directory". What gives? I'm
running LM7.2.
I use the 'howto' at http://home.tampabay.rr.com/jandr/Mandrake.htm to
compile and install a 2.4
Mike,
I didn't see apt-get under Cooker but I did see it under Contrib. I
grabbed
the source rpm and ran into a compile problem:
Building program /usr/src/RPM/BUILD/apt-0.3.19cnc27/bin/hdlist2pkglist
Installing desc.apt to
/usr/src/RPM/BUILD/apt-0.3.19cnc27/scripts/dselect
Installing install to
On Sun, 7 Jan 2001, Bill Thompson wrote:
Mike MacCana wrote:
I actually annoyed the avifile about qt locations and he fixed things
accordingly for 0.53 :). So you prolly dson't need that anymore. Not that
it will help your compile...
Mike
Ken Thompson wrote:
I successfully compiled avifile and the xmms plugin for avifile.
Can anyone tell me where I can get avi files to use for a test.
The sites I tried, downloads have not been successful for one
reason
or another.
Thanks,
Bill
Mike MacCana wrote:
I actually annoyed the avifile about qt locations and he fixed things
accordingly for 0.53 :). So you prolly dson't need that anymore. Not that
it will help your compile...
Mike
--
Mike MacCanaSupport Consultant
Hi,
Anyone know where the Python module dl (dlmodule.so) is located?
It's not in python-1.5.2-12mdk.
Bill
--
From the shores of Khlong YaiPhuan, Bangkok, Thailand...
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
Will these rpm files work with Linux boxes using 486/586 compatible
CPUs?
Bill
[EMAIL PROTECTED] wrote:
Cooker Packages For LM 7.2
(http://forum.mandrakesoft.com/article.php3?sid=20001213130438)
So I've spend most of the day to get some of your favourite packages rebuilt for LM
7.2. It
[EMAIL PROTECTED] wrote:
Name Your Most Wanted Cooker Packages, Please
(http://forum.mandrakesoft.com/article.php3?sid=20001212151414)
Just got my new 150 MB quota on mandragon.org, so I thought I might do some of you a
favour and recompile wanted Cooker package for LM 7.2.
Please
oblem with it, tho. It arrives here without any
wordwrapping. I have to run up a Netscape compose window or save it
to a file and read it in an editor.
Bill Thompson
MDK 7.1
Netscape 4.75
--
From the shores of Khlong YaiPhuan, Bangkok, Thailand...
Keep in touch with http://mandrakeforu
34 matches
Mail list logo