Does it work if you use cdrecord by hand form the command line?
On Sunday 13 October 2002 12:22 pm, Steffen Barszus wrote:
Am Samstag, 12. Oktober 2002 17:56 schrieb Ken Thompson:
On Saturday 12 October 2002 02:08 am, Steffen Barszus wrote:
dummy -eject -pad tsize=109760s -
Make sure
Am Montag, 14. Oktober 2002 20:19 schrieb Todd Flinders:
Does it work if you use cdrecord by hand form the command line?
I couldn't believe that it is so sensible under linux to burn. changed the
cd-burner now to secondary master and dvd as primary slave , hd as primary
master and burned a
Am Samstag, 12. Oktober 2002 17:56 schrieb Ken Thompson:
On Saturday 12 October 2002 02:08 am, Steffen Barszus wrote:
dummy -eject -pad tsize=109760s -
Make sure to un check make dummy run first ...
I get's me every time.. Also, I've had the best result by not using any
padding
Steffen Barszus wrote:
For now I tested :
-gtoaster
-k3b
-cdbakeoven
-xcdroast
-gcombust
with no difference.
Try temporarily putting your CD-RW drive on an IDE channel all by
itself, as master, of course.How many IDE channels do you have and
what devices placed where? You
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Ron Stodden wrote:
... You should never have the hard disk with
the ISO file to burn and the CD-RW on the same IDE channel.
There was a motherboard chipset problem that garbled the data if two
devices on the same IDE channel were in use
On Sunday 13 October 2002 01:22 pm, Steffen Barszus wrote:
Am Samstag, 12. Oktober 2002 17:56 schrieb Ken Thompson:
On Saturday 12 October 2002 02:08 am, Steffen Barszus wrote:
dummy -eject -pad tsize=109760s -
Make sure to un check make dummy run first ...
I get's me every time..
Hi!
After installing Mdk 9.0 all went fine and my Teac IDE was installed over
ide-scsi. After a try with gcombust and gtoaster I was not able to burn. For
debugging I started the following burning session with just one simple file.
There seems to be something burned but as you can see in the
On Saturday 12 October 2002 02:08 am, Steffen Barszus wrote:
dummy -eject -pad tsize=109760s -
Make sure to un check make dummy run first ...
I get's me every time.. Also, I've had the best result by not using any
padding YMMV.
Want to buy your Pack or Services from MandrakeSoft?