]: [expert] 7.2 - Two little annoyances . . . on A7V
w/ATA100
[EMAIL PROTECTED] (Robert Fox) wrote:
> BootMagic finds the /dev/hde6 partition (logical) fine - but I only get LI
> during lilo bootup and I have to use a boot floppy instead.
well, lets see. http://www.google.com, search for
[EMAIL PROTECTED] (Robert Fox) wrote:
> BootMagic finds the /dev/hde6 partition (logical) fine - but I only get LI
> during lilo bootup and I have to use a boot floppy instead.
well, lets see. http://www.google.com, search for 'linux lilo howto error'
There I click on
http://www.aimnet.com/~h
BootMagic finds the /dev/hde6 partition (logical) fine - but I only get LI
during lilo bootup and I have to use a boot floppy instead.
I've tried to re-partition using a /boot partition and guarantee it is
below the 1024 limit with no success.
Bummer.
Robert Fox
At 18:13 09/01/2001 -0700,
Robert Fox <[EMAIL PROTECTED]> wrote:
> Here is my lilo.conf - thanks anyway!
>
> boot=/dev/hde6
> map=/boot/map
I don't remember if you got this fixed or not.
If not, does partition magic know to get your
boot image from /dev/hde6?
rc
Rusty Carruth Email: [EMAIL PROTECTED] or [
t; > > >
> > > >Hi Robert, after you edited lilo.conf did you run /sbin/lilo before you
> > > >rebooted. What lilo does is store its infomation in the boot sector so
> > when
> > > >changes are made to the conf file they need to be update on the boo
Robert Fox wrote:
> Here is my lilo.conf - thanks anyway!
>
> boot=/dev/hde6
> map=/boot/map
> install=/boot/boot.b
> vga=791
> default=linux
> keytable=/boot/us.klt
> lba32
> prompt
> timeout=50
> message=/boot/message
> menu-scheme=wb:bw:wb:bw
> image=/boot/vmlinuz
> label=linux
>
in the boot sector so
> when
> > >changes are made to the conf file they need to be update on the boot
> sector
> > >as well and that is why you run /sbin/lilo (as root).
> > >
> > >Hope this helps
> > >
> > >Mark Hillary
t;From: "Robert Fox" <[EMAIL PROTECTED]>
> >To: <[EMAIL PROTECTED]>
> >Sent: Saturday, January 06, 2001 7:12 PM
> >Subject: [expert] 7.2 - Two little annoyances . . . on A7V w/ATA100
> >
> >
> >Ok here goes:
> >
> >I have an I
helps
>
>Mark Hillary
>- Original Message -
>From: "Robert Fox" <[EMAIL PROTECTED]>
>To: <[EMAIL PROTECTED]>
>Sent: Saturday, January 06, 2001 7:12 PM
>Subject: [expert] 7.2 - Two little annoyances . . . on A7V w/ATA100
>
>
>Ok here go
Mark Hillary
- Original Message -
From: "Robert Fox" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Saturday, January 06, 2001 7:12 PM
Subject: [expert] 7.2 - Two little annoyances . . . on A7V w/ATA100
Ok here goes:
I have an IBM 30Gig ATA./100 drive on an Asu
Ok here goes:
I have an IBM 30Gig ATA./100 drive on an Asus A7V MB - below is my
partition file from the system.
Problem #1: During install I passed the ide parms for the ATA/100 drive
and all installed well. I installed the lilo bootloader on /dev/hde6
(root) partition and edited the lilo.
11 matches
Mail list logo