I recieved a Video that says it's a .wmv file but Linux Properties says
it is a ASF format.
I have tried to play it with VLC, Xine, Mplayer but there is a codec
problem.
They all play the Audio of the file but not the Video.
Using Mplayer, I get this error message.
The playback of this movie
FC12/Kde
How do you make the Height of Cairo-Dock Smaller ?
I have been all over the configure settings and can't find how to make
Height smaller (top to bottom)
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines:
FC12/KDE
I had cairo-dock installed, but I removed it and now I got problems
with libcairo.so.2 .
I got problems with Firefox, How do I get XPCOM to load.
1.
$Firefox
Couldn't load XPCOM.
2.
Thunderbird won't start because of libcairo.so.2 , I did a 'locate' on
libcairo.so.2 but it
FC12/KDE
# cmake -DCMAKE_INSTALL_PREFIX=/opt/kde4 .. #here you put your path to
kde4.
-- The C compiler identification is GNU
-- The CXX compiler identification is unknown
-- Check for working C compiler: /usr/bin/gcc
-- Check for working C compiler: /usr/bin/gcc -- works
-- Detecting C
On 01/02/2010 01:32 AM, Patrick Bartek wrote:
--- On Fri, 1/1/10, Jimmickey...@sbcglobal.net wrote:
On 01/01/2010 12:58 PM, Patrick
Bartek wrote:
VLC DVDPlayback
I have libdvdcss already installed.
And I should be telling you that this is a X86_64 box.
VLC and libdvdcss
On 01/02/2010 01:42 PM, Suvayu Ali wrote:
Hi Jim,
On Saturday 02 January 2010 07:54 AM, Jim wrote:
both VLC and libdvdcss was installed with Yum.
I think it would be better if you could provide us with more
information. Try to run vlc from a terminal, try with other media
players. Look
On 01/02/2010 02:22 PM, Patrick Bartek wrote:
--- On Sat, 1/2/10, Jimmickey...@sbcglobal.net wrote:
[snip]
How did you install VLC? If you didn't use yum
or an equivalent package manager, you may not have gotten
the dependent libraries, etc. My new, but fully
updated F12
FC11
where can Codecs for VLC be downloaded for playing DVD videos.
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
On 01/01/2010 12:58 PM, Petrus de Calguarium wrote:
Jim wrote:
where can Codecs for VLC be downloaded for playing DVD videos.
Due to licensing issues or uncertainty about legality (or some such reasons),
they
are not in rpm-free nor in rpm-nonfree. Instead
On 01/01/2010 12:58 PM, Patrick Bartek wrote:
VLC DVDPlayback
I have libdvdcss already installed.
And I should be telling you that this is a X86_64 box.
VLC and libdvdcss is a X86_64 rpm
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe:
Sabrent 802.11N PCI-802N , two antennas,
When I purchased this card it drove me crazy determining which Linux
driver that was for this card.
RT2860sta driver, I have it in a bedroom in a PC that couldn't get a
100% signal to it from a Linksys router, but with this card it gave me a
100%
I was at the Super Walmart today in Indianapolis In., to check out the
new Mini-laptops w/ MS7 and wanted to see how it look, all the laptops
on display was asking for a PASSWOED, Ask a Walmart employee what was
the password to check them out, she said some customer had changed all
the
FC11 and FC12 / KDE
latest version of Firefox keeps jumping back to a previous website, just
click on anything in a website, and it kicks you back to a previous website.
This happens on two different X86_64 boxes using Fedora 11, 12 .
--
fedora-list mailing list
fedora-list@redhat.com
To
FC12/KDE
Trying to install Development Packages and having dependency problems.
The devel packages I have installed are all 4.4.20-20 versions.
I also ran these commands and it didn't help:
package-cleanup --problems
package-cleanup --dupes
On 12/26/2009 12:10 PM, jack craig wrote:
yum install development libraries ???
# yum install development libraries
Loaded plugins: auto-update-debuginfo, presto, refresh-packagekit
Setting up Install Process
No package development libraries available.
No package hda available.
Nothing to do
FC12/KDE
Trying to compile but I guess I do not have everything I need installed.
kernel-devel, and gcc is installed.
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines:
On 12/24/2009 05:12 PM, Jim wrote:
FC12/KDE
Trying to compile but I guess I do not have everything I need installed.
kernel-devel, and gcc is installed.
# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking
On 12/23/2009 11:09 AM, Bob Goodwin wrote:
I have two new F-12 installs, one each 32 and 64 bit boxes. Yumex
fails on both, although I think it may have worked initially after
the Omegalive install. My memory is a bit fuzzy on that point, but
it could have resulted from an update if
On 12/21/2009 09:05 PM, Rahul Sundaram wrote:
On 12/22/2009 07:11 AM, Jim wrote:
Can some one tell what happen to gnome-volume-manager in FC12 ?
Obsoleted by Nautilus for several releases IIRC.
Rahul
What does Gnome use as volume control replacement ?
--
fedora-list mailing
On 12/22/2009 11:51 AM, Ian Malone wrote:
volume control (sound
volume control (sound
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
Can some one tell what happen to gnome-volume-manager in FC12 ?
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
On 12/20/2009 11:08 AM, NoSpaze wrote:
Am Freitag, den 18.12.2009, 21:26 -0500 schrieb Jim:
FC12/KDE
Yumex crashes just after starting, it checks package repos then crashes,
A attachment is attached showing yumex start from command line ,and
output to /var/log/messages.
Same twice
FC12/KDE
Intel sound 82801H, All the setting in PulseAudio is up to Max.
I have a fresh FC12 install with no Sound, and I have attached LSMOD and
Sound from /var/log/messages
snd-hda-intel
]$ lsmod
Module Size Used by
sunrpc158388 1
cpufreq_ondemand
FC12/KDE
How would I do a yum command to enablerepo=updates-testing to update
python. I did it this way but it won't work.
yum update --enablerepo=updates-testing python
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
On 12/18/2009 08:07 AM, Antonio M wrote:
2009/12/18 Timignored_mail...@yahoo.com.au:
On Fri, 2009-12-18 at 11:50 +0100, Antonio M wrote:
I got an attachment (Microsoft Office doc) but I didn't get the option
of F11 to open it with Openoffice or any other application, there is
no open
FC12/KDE
Failure of starting Yumex, the Automatic Bug Tool starts to make Report
and then freezes and after one minute it comes back and says it has
Terminated by signal 11
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
In /etc/abrt/plugins/Bugzilla.conf, do you enter your Username and
Password or
Email address and password ?
I changed my password and it won't let me send a Bug Report, it's having
problem with username and password.
Dec 18 6;00pm bugzilla goes off net for 8 hours.
--
fedora-list mailing
FC12/KDE
Yumex crashes just after starting, it checks package repos then crashes,
A attachment is attached showing yumex start from command line ,and
output to
/var/log/messages.
$ yumex
\running
Current Settings
autorefresh: True
branding_title: 'Yum Extender NextGen'
but no fixes.
Hi Jim,
If you're booted to that kernel, try:
su -c depmod -ae
-c
Chris thank you very much.
That did the job, thanks again.
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http
On 12/15/2009 04:55 PM, Paul W. Frields wrote:
System Preferences
File Management, in the Media
System Preferences File Management are you thinking in terms of Gnome , I
can't find
System Preferences in KDE.
--
fedora-list mailing list
fedora-list@redhat.com
To
On 12/16/2009 04:21 AM, Michal wrote:
Also, blacklisting IPv6 from modprobing and disabling IPv6 support in
Firefox will do nothing for you. You sound like one of those people when
it comes to IPv6. You've heard a lot of*FUD*.
Also, blacklisting IPv6 from modprobing and disabling IPv6
AM, Jim wrote:
On 12/15/2009 08:36 PM, Robert Collard wrote:
May sound silly, but have you turned off your home modem or reset it
lately? Sometimes that is all it takes.
To add to that, if you add a router, a computer and the Mac# changes
some of these Internet Modems have to be reset
FC12/KDE
How do I get k3b to copy over files when I add a Directory to a data/dvd
project.
it burns the folder but no file in it.
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines:
FC11/KDE
Attempting to read Pictures on mounted SD card.
If i tell it to use DigiKam it will read the card and display pictures.
If I tell it to use Filemanager it will open the wine.cfg window, there
are no wine
apps on SD card , just pictures.
I uninstalled wine, but no help, If I tell it
Is there a command you can run like tail -f or what ever, to see where a
Application is called from.
Running a application that I can tell where it is started or run from.
Like when I plug in a SD card what and where is it started from.
I know this Question sounds confusing , but I'm not
tell it to use Filemanager it will open the wine.cfg window, there are
no wine
apps on SD card , just pictures.
I uninstalled wine, but no help, If I tell it to use Filemanager it still
looking for
wine.cfg.
Hi Jim!
If I were you I would open a shell, obtain root privilege, use mount
On 12/15/2009 08:36 PM, Robert Collard wrote:
May sound silly, but have you turned off your home modem or reset it
lately? Sometimes that is all it takes.
To add to that, if you add a router, a computer and the Mac# changes
some of these Internet Modems have to be reset to reconize the
On 12/13/2009 07:22 PM, H. Willstrand wrote:
On Mon, Dec 14, 2009 at 1:15 AM, Bob Goodwinbobgood...@wildblue.net wrote:
I can ssh from this F-11 box to the F-12 box but can't get a
connection in the reverse direction. It keeps giving Connection
refused.
I use Firestarter and
On 12/14/2009 08:20 AM, Patrick O'Callaghan wrote:
On Sun, 2009-12-13 at 14:30 -0500, Jim wrote:
FC12/KDE
Are there any certain packages in Fedora for WPA, WPA2 encrpt.
What are certain packages?
WPA and WPA2 are supported by nm-applet, which is still the recommended
way
On 12/14/2009 11:28 AM, Jim wrote:
On 12/14/2009 08:20 AM, Patrick O'Callaghan wrote:
On Sun, 2009-12-13 at 14:30 -0500, Jim wrote:
FC12/KDE
Are there any certain packages in Fedora for WPA, WPA2 encrpt.
What are certain packages?
WPA and WPA2 are supported by nm-applet, which is still
FC12/KDE
Are there any certain packages in Fedora for WPA, WPA2 encrpt.
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
On 12/09/2009 11:23 PM, Sam Varshavchik wrote:
Jim writes:
FC12/KDE
I'm having DNS problems.
I can't get Firefox to goto linuxtoday.com , lxer.com , or
rpmfusion.org ,
but I can goto yahoo.com , foxnews.com .
I have to do in Firefox a about:config and inject
network.dns.disableIPv6
FC12
I can't believe , doing a google search I can't find the X86_64 FlashPlayer.
Does anyone know where it is ?
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines:
FC12/KDE
I'm having DNS problems.
I can't get Firefox to goto linuxtoday.com , lxer.com , or rpmfusion.org ,
but I can goto yahoo.com , foxnews.com .
I have to do in Firefox a about:config and inject network.dns.disableIPv6
to get all websites.
I can't use Konqueror WebBrowser and goto
On 12/09/2009 10:22 PM, Jim wrote:
FC12/KDE
I'm having DNS problems.
I can't get Firefox to goto linuxtoday.com , lxer.com , or
rpmfusion.org ,
but I can goto yahoo.com , foxnews.com .
I have to do in Firefox a about:config and inject
network.dns.disableIPv6
to get all websites.
I can't
FC12/KDE
Yum is hanging up at Running Transaction , how do I correct this problem.
Downloading Packages:
Setting up and reading Presto delta metadata
Processing delta metadata
Package(s) data still to download: 9.0 M
(1/8): keyutils-libs-devel-1.2-6.fc12.x86_64.rpm|
29 kB
FC12
What Config files in /etc have to be setup for using USB devices ?
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
On 11/29/2009 11:26 AM, Sam Sharpe wrote:
2009/11/29 Jimmickey...@sbcglobal.net:
FC12
What Config files in /etc have to be setup for using USB devices ?
None.
--
Sam
Now I realize I should have phrased that differently.
What I'm trying to do is connect to my cell phone , a
On 11/29/2009 12:44 PM, Craig White wrote:
On Sun, 2009-11-29 at 12:18 -0500, Jim wrote:
On 11/29/2009 11:26 AM, Sam Sharpe wrote:
2009/11/29 Jimmickey...@sbcglobal.net:
FC12
What Config files in /etc have to be setup for using USB devices ?
None.
--
Sam
What is the latest fedora-release and fedora-release-notes rpms.
I have ;
fedora-release-12-2
fedora-release-notes-12.0.2-1.fc12
I'm not getting any updates and a lot of can't find a lot of fedora repos
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe:
On 11/23/2009 04:35 PM, Rahul Sundaram wrote:
On 11/24/2009 03:00 AM, Jim wrote:
What is the latest fedora-release and fedora-release-notes rpms.
I have ;
fedora-release-12-2
fedora-release-notes-12.0.2-1.fc12
I'm not getting any updates and a lot of can't find a lot of fedora repos
FC11/Mint
I have a fdisk output that is showing a cylinder overlap , how would I
fix this problem ?
How can you tell using fdisk which partitions are / ?
These partition are for Fedora and Mint a Dual boot
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x652101fc
FC 11
We have two Linux distros installed on one hard drive.
How do I in fedora tell grub to show both Distros on the Boot Menu at
boot start up so I may select select one of two at Boot start.
If I do a grub-install /dev/hda from Fedora it will only show the
Fedora Kernels at Boot Menu and
Fc11/KDE
Where in the Menu do you execute ImageMagick, I have checked in Graphics
and no execute for ImageMagick.
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines:
If it's a command line tool, then imagemagick isn't the execute
command, because it won't execute. What would the command be ?
And the ImageMagick RPM is installed.
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
I just trashed Windows 7 and installed FC11 but before I connect to the
internet how best could I protect the machine?
Is the firewall up and running by default effective? It's a home machine but I
plan on adding a web server.
What is the best anti-virus?
(Bye, bye windows!)
Thanks,
Jim
From: ch...@tylers.info
To: fedora-list@redhat.com
Date: Tue, 10 Nov 2009 19:53:34 -0500
Subject: Re: new install, Firewall, anti-virus?
On Wed, 2009-11-11 at 00:15 +, Jim Douglas wrote:
I just trashed Windows 7 and installed FC11 but before I connect to
the internet how best
On 11/05/2009 04:32 PM, Mike Cloaked wrote:
Jimmickeyboaat sbcglobal.net writes:
FC11-X86_64/KDE.
How do I setup a Samsung CLX-3170 Scanner in FC11 ?
# sane-find-scanner
found USB scanner (vendor=0x04e8 [Samsung Electronics Co., Ltd.],
product=0x342a [CLX-3170 Series]) at
Does this affect Fedora and how can we fix it.
http://www.theregister.co.uk/2009/11/03/linux_kernel_vulnerability/
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines:
.x86_64 ro
root=/dev/mapper/vg_coolzeropc-lv_root rhgb quiet vga=0x31B
initrd /initrd-2.6.30.9-90.fc11.x86_64.img
This should work without problems. Of course, you need to set the
root=/dev/mapper/whatever to your suitable settings. Good luck!
Greetings,
Jim.
Hi all,
I've just installed
And, you can try installing the fedora grub-0.97-51, which means you are
overwriting the ubuntu grub 2. It should work, as it's only used for
booting, but grub 2 is also little new to me. You got yourself a
interesting problem :)
Greetings,
Jim.
Hi there,
With fedora, you normally point
is also little new to me. You got yourself a
interesting problem :)
Greetings,
Jim.
Hi there,
With fedora, you normally point to the kernel directive. Like this:
kernel /vmlinuz-2.6.30.9-90.fc11.x86_64 ro
root=/dev/mapper/vg_coolzeropc-lv_root rhgb quiet
Here a full example:
title Fedora
On 10/29/2009 08:17 AM, Athmane Madjoudj wrote:
On Thu, Oct 29, 2009 at 12:52 PM, jdowj...@earthlink.net wrote:
From: Michael Cronenworthm...@cchtml.com
Sent: Wednesday, 2009/October/28 16:03
It seems in the past month brute force attacks are on the rise. They are
targeting anyone
On 10/29/2009 02:43 PM, Yaakov Nemoy wrote:
2009/10/29 Jimmickey...@sbcglobal.net:
On 10/29/2009 08:17 AM, Athmane Madjoudj wrote:
On Thu, Oct 29, 2009 at 12:52 PM, jdowj...@earthlink.netwrote:
From: Michael Cronenworthm...@cchtml.com
Sent: Wednesday, 2009/October/28
On 10/29/2009 05:08 PM, Robert Moskowitz wrote:
Robert Moskowitz wrote:
Kam Leo wrote:
On Thu, Oct 29, 2009 at 6:42 AM, Robert Moskowitz
r...@htt-consult.com wrote:
I am now trying a FC11 install, I tried the recommendation below
that worked
with FC10, to press tab then enter askmethod.
Fc11
I must be missing something, but has V4L (video4Linux) changed it's name ?
I can't find it under the V4L name.
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines:
FC11
Where is the VLC error logs ?
I have checked in /var but can't them
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
FC11-X86_64/Kde
Proftpd is installed and enabled/running in Services, and when I try to
execute from Terminal, SU, it won't execute or display any errors as to why.
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
On 10/26/2009 12:33 PM, Jim wrote:
FC11-X86_64/Kde
Proftpd is installed and enabled/running in Services, and when I try
to execute from Terminal, SU, it won't execute or display any errors
as to why.
I found this in Messages; What does it mean ?
Oct 26 12:36:20 localhost proftpd[15234
On 10/26/2009 04:06 PM, Roberto Ragusa wrote:
Jim wrote:
On 10/26/2009 12:33 PM, Jim wrote:
I found this in Messages; What does it mean ?
Oct 26 12:36:20 localhost proftpd[15234]: localhost.localdomain - Failed
binding to ::, port 21: Address already in use
Oct 26 12:36:20
On 10/26/2009 04:28 PM, Jim wrote:
On 10/26/2009 04:06 PM, Roberto Ragusa wrote:
Jim wrote:
On 10/26/2009 12:33 PM, Jim wrote:
I found this in Messages; What does it mean ?
Oct 26 12:36:20 localhost proftpd[15234]: localhost.localdomain -
Failed
binding to ::, port 21: Address already
On 10/24/2009 12:11 PM, Louis Lagendijk wrote:
On Sat, 2009-10-24 at 11:10 -0400, Gene Heskett wrote:
On Saturday 24 October 2009, Louis Lagendijk wrote:
Problem 2 is that the scanner doesn't even check in as shown above.
OTOH, I also have an Epson 1250u that works flawlessly,
FC 8
Installing Chromium in Fedora 8 ?
I Have a friend that lives about 700 miles from me and I want to install
Chromium on his Fedora 8 computer, and I notice that FedoraPeople.org
doesn't have a RPM for Fedora 8.
How do I do it ?
Do I use the Daily.targz file ?
--
fedora-list mailing
On Sat, Oct 24, 2009 at 11:02 PM, Jimmickey...@sbcglobal.net wrote:
FC 8
Installing Chromium in Fedora 8 ?
I Have a friend that lives about 700 miles from me and I want to install
Chromium on his Fedora 8 computer, and I notice that FedoraPeople.org
doesn't have a RPM for Fedora 8.
How
What is the correct name for ;
Vnc
Vnc-Server
Can't find them in FC11 Repos
--
fedora-list mailing list
fedora-list@redhat.com
To unsubscribe: https://www.redhat.com/mailman/listinfo/fedora-list
Guidelines: http://fedoraproject.org/wiki/Communicate/MailingListGuidelines
FC11-X86_64/Kde
Trying to setup VNC in fedora 11 but if I put the following line in
/etc/syconfig/iptables ;
# 5901 corresponds to :1, 5902 for :2 and so on.
-A INPUT -m state --state NEW -m tcp -p tcp --dport 5901:5902 -j ACCEPT
Then do # service iptables restart , it fails.
What is
FC11/KDE
Samsung has a very good printer in the CLX3175FN Lazer , I picked up for
$250.00 at OfficeMax, a $400.00 printer.
Anyhow You can get the printer drivers for Linux on their Support Site.
When installing the print drivers you have to do it from su - .
Selinux won't let the printer to
On 10/21/2009 02:18 PM, Rick Stevens wrote:
Jim wrote:
FC11/KDE
Samsung has a very good printer in the CLX3175FN Lazer , I picked up
for $250.00 at OfficeMax, a $400.00 printer.
Anyhow You can get the printer drivers for Linux on their Support Site.
When installing the print drivers you
Thunderbird 3.0-2.7.b4.fc11 has strange problems going on.
My friends are calling me and telling me that Mouse won't work , can't
send email
on SMTP server, loosing delete Icons etc.
On the first two I had them move .thunderbird into /Download, temp, and
uninstall Thunderbird and reinstall
Fc11/KDE
Is there anyone out that is using a USB hub to connect to one USB
Printer from mulitiple computers ?
Like auto self detect hub on each port. Not a switch hub.
I have tried two different ones with no luck .
Could you give me some Make, Models.
--
fedora-list mailing list
On 10/09/2009 01:34 PM, Linuxguy123 wrote:
On Fri, 2009-10-09 at 12:56 -0400, Jim wrote:
Fc11/KDE
Is there anyone out that is using a USB hub to connect to one USB
Printer from mulitiple computers ?
Like auto self detect hub on each port. Not a switch hub.
I have tried two different ones
On 10/09/2009 02:48 PM, Mikkel wrote:
Jim wrote:
From what I have read, If you have all the boxes on the same LAN, and
the printer
connected by ethernet the boxes should be able to connect to printer using
lpd:// instead of ipp:// .
Am I on the right track ?
Does the print server
On 10/09/2009 04:24 PM, Mikkel wrote:
Jim wrote:
I'm using lpd:// .
I have my home cups network printer setup that way and I can print
without any problems. I'm using a 2Wire 1800HW router. Samsung CLX3175FN
Printer.
But I have a friend with the same settings using a Linksys WRT54GS
router
On 10/08/2009 11:39 AM, Richard Shaw wrote:
On Thu, Oct 8, 2009 at 10:15 AM, Tim Waughtwa...@redhat.com wrote:
On Thu, 2009-10-08 at 17:04 +0200, Christoph Höger wrote:
The change you will be expected to make on the client is to allow CUPS
broadcast packets from the server. To do that:
On 10/08/2009 12:02 PM, Tim Waugh wrote:
On Thu, 2009-10-08 at 11:50 -0400, Jim wrote:
I set Network printing up on a 2wire router and took printer and Linux
computer to a different location that had a Linksys WRT54G2 router and I
loaded software in a Windows XP box for network printing
On 10/07/2009 04:56 PM, Gerhard Magnus wrote:
How can I get the resolution setting for my nvidia card to stick?
Whenever I log on the resolution reverts to 1280 x 1024. I can reset
this to 1680 X 1050 using the nvidia-settings widget and I click the
Save to X Configuration File button but
On 10/06/2009 10:59 AM, Tim Waugh wrote:
On Tue, 2009-10-06 at 10:56 -0400, Daniel J Walsh wrote:
I guess the question is why does the hplip want to listen on the
Multicast DNS port. If this is supposed to happen, we need to add it
to policy.
Please file a bug against HPLIP. The
wrote:
On 10/05/2009 02:08 PM, Jim wrote:
FC11/Kde
Trying to print on a Samsung CLX-3175FN.
Selinux is playing havoc with printer drivers, these drivers are from
Samsung and I'm getting many Selinux Alerts, to many to keep running
Restorecon.
The printing
FC11/Kde
Trying to print on a Samsung CLX-3175FN.
Selinux is playing havoc with printer drivers, these drivers are from
Samsung and I'm getting many Selinux Alerts, to many to keep running
Restorecon.
The printing is coming out with double columns with 1/8 white lines
down through text or
On 10/05/2009 02:11 PM, Daniel J Walsh wrote:
On 10/05/2009 02:08 PM, Jim wrote:
FC11/Kde
Trying to print on a Samsung CLX-3175FN.
Selinux is playing havoc with printer drivers, these drivers are from
Samsung and I'm getting many Selinux Alerts, to many to keep running
Restorecon
On 10/04/2009 01:12 AM, Ed Greshko wrote:
Jim wrote:
FC11/KDE-4
Have printer setup as lpd://172.16.1.35 and I can ping the printer and
driver is setup , but when I send a test page it Stops in print que.
Policy setting is
Error Policy : Retry Job
Operation Policy: Default Behavior
On 10/04/2009 01:12 AM, Ed Greshko wrote:
Jim wrote:
FC11/KDE-4
Have printer setup as lpd://172.16.1.35 and I can ping the printer and
driver is setup , but when I send a test page it Stops in print que.
Policy setting is
Error Policy : Retry Job
Operation Policy: Default Behavior
On 10/04/2009 06:15 PM, Richard England wrote:
On 10/03/2009 09:45 PM, Jim wrote:
FC11/KDE-4
Have printer setup as lpd://172.16.1.35 and I can ping the printer
and driver is setup , but when I send a test page it Stops in print que.
Policy setting is
Error Policy : Retry Job
Operation
FC11/KDE-4
Have printer setup as lpd://172.16.1.35 and I can ping the printer and
driver is setup , but when I send a test page it Stops in print que.
Policy setting is
Error Policy : Retry Job
Operation Policy: Default Behavior
Cups is running in Services
--
fedora-list mailing list
On 10/01/2009 11:59 AM, Gerhard Magnus wrote:
How can I get the resolution setting for my nvidia card to stick?
Whenever I log on the resolution reverts to 1280 x 1024. I can reset
this to 1680 X 1050 using the nvidia-settings widget and I click the
Save to X Configuration File button but this
Dual booting with WinXP and Fedora 11.
Hard Drive 0sda1 WindowsXP
Hard Drive 1sdb1 /boot Fedora 11
Isn't the command grub-install /dev/sda what you do to write grub to
boot from
sda ?
I ran that command from fedora 11 but it still wants to boot from
WindowsXP .
--
On 10/01/2009 04:41 PM, suvayu ali wrote:
2009/10/1 Jimmickey...@sbcglobal.net:
Dual booting with WinXP and Fedora 11.
Hard Drive 0sda1 WindowsXP
Hard Drive 1sdb1 /boot Fedora 11
Isn't the command grub-install /dev/sda what you do to write grub to boot
from
sda ?
I ran
On 10/01/2009 06:34 PM, Craig White wrote:
On Thu, 2009-10-01 at 17:05 -0400, Jim wrote:
On 10/01/2009 04:41 PM, suvayu ali wrote:
2009/10/1 Jimmickey...@sbcglobal.net:
Dual booting with WinXP and Fedora 11.
Hard Drive 0sda1 WindowsXP
Hard Drive 1sdb1 /boot
.wine is not showing up in /home/user but wine packages are installed.
See attached.
wine-fonts-1.1.29-1.fc11.noarch
wine-twain-1.1.29-1.fc11.i586
wine-common-1.1.29-1.fc11.noarch
wine-devel-1.1.29-1.fc11.i586
wine-desktop-1.1.29-1.fc11.noarch
wine-capi-1.1.29-1.fc11.i586
On 09/29/2009 01:19 PM, Kevin Martin wrote:
Jim wrote:
.wine is not showing up in /home/user but wine packages are installed.
See attached.
Have you tried *running* wine yet? You won't get a .wine directory
until you do.
Kevin
What wine command should I run ?
just the wine
1 - 100 of 770 matches
Mail list logo