Hi, I have a problem with my Nikon LS30 scanner now and then but it happens more and more. The Nikon LS30 has 2 motors, one to push and pull the scanning-unit up and down to set the focus and one to drag the scanning-unit forth and back to scan the negative or slide. When I switch the scanner on it starts pulling the scanning-unit down and then pushing it up a few millimeters. But than it stops and give a low frequency beep for about 10 seconds. The green led is flashing and after the beep stops it glows continuously. Then the scanner does nothing and cannot be used.
I tried to solve this problem many times and disassembled the scanner almost completely. In most cases it starts working properly after that but I never found anything that caused the problem. Now the scanner has this problem so often that I cannot use it any more. I am using a SCSI adapter on a modern 2,8 MHz P4 system, Windows XP professional and VueScan 7.5.47. Does anyone know anything of this problem and can give me any advise? Vincent ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body
