Robert, Are you using the same film holder as for your 4x5? The crossways part. I was inadvertently using the slide holder for about 10 minutes. Yuck!
Glenn Thureson ----- Original Message ----- From: "Robert Paup" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, June 30, 2002 1:40 PM Subject: [filmscanners] Epson 2450 and 120 scanning Anybody getting good 120 scans from the Epson 2450? I can get decent results scanning 4x5 negatives with this scanner, but using the Vuescan, Silverfast or Epson twain scan program, I get mushy scans with 120 film. I can't print them at any size while a 4x5 scan prints nicely at 12.75x16.15 with some sharpening. I use 2400 dpi for all scans. I know that this isn't the scanner for 120 but it should work for smaller prints from BW negatives, especially if I can get good results for 4x5. I have concluded that this scanner is fixed focus since adjusting the focus in Vuescan seems to have no effect. I have also tried raising the negative holder in small increments and scanning with the film directly on the glass. The film appears reasonably flat in the holder. ---------------------------------------------------------------------------- ------------ Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body ---------------------------------------------------------------------------------------- Unsubscribe by mail to [EMAIL PROTECTED], with 'unsubscribe filmscanners' or 'unsubscribe filmscanners_digest' (as appropriate) in the message title or body