I like the Adaptec SCSI cards and I suggest that your friend get one that
can service both internal and external devices. The cards that usually come
with scanners or other SCSI devices are usually bare bones cards that only
have either internal or external connecters and are thus limited. My SC
Polaroid suggests the use of Adaptec products and will offer technical
support.
I have the Adaptec AIC 7850 and Win XP has no problems with it. The
scanner needs a 50 pin Centronics M or DB-25M connector.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]] On Behalf Of
nie Kubiak
Sent: Saturday, September 07, 2002 7:15 AM
To: [EMAIL PROTECTED]
Subject: [filmscanners] RE: Which SCSI Card for SS4000
Polaroid suggests the use of Adaptec products and will offer technical
support.
I have the Adaptec AIC 7850 and Win XP has no problems with it. The
scanner needs a
EMAIL PROTECTED]]On Behalf Of Mike Stephens
Sent: Saturday, September 07, 2002 10:33 AM
To: [EMAIL PROTECTED]
Subject: [filmscanners] RE: Which SCSI Card for SS4000
Doesn't the SS4000 come bundled with a SCSI card?
I thought it did (but could be mistaken) as I have one
here still in the package
Tom,
> The input is a SCSI 1 cable (50 pin) the output (to another SCSI
> device) is
> 25 pin.
I believe either can be used to connect to the SCSI card.
Austin
Unsubscribe by mail to [EMAIL PROTECTED], wit
onday, September 09, 2002 3:33 PM
> To: [EMAIL PROTECTED]
> Subject: [filmscanners] RE: Which SCSI Card for SS4000
>
>
> Tom,
>
> > The input is a SCSI 1 cable (50 pin) the output (to another SCSI
> >
On behalf of my friend, I'd like to thank everyone who answered this
question. I understand he has acquired a card and cable now and asked
me to forward his thanks.
Thanks again all,
Art
Kapetanakis, Constantine wrote:
> The scanner will work with most if not all SCSI cards. It was extensivel
The ss4000 does have a SCSI termination switch.
-Original Message-
From: Austin Franklin [mailto:[EMAIL PROTECTED]]
Sent: Monday, September 09, 2002 4:24 PM
To: [EMAIL PROTECTED]
Subject: [filmscanners] RE: Which SCSI Card for SS4000
Hi Tom,
Possibly termination? I don't rem
D]
[mailto:[EMAIL PROTECTED]]On Behalf Of Austin Franklin
Sent: Monday, September 09, 2002 8:00 PM
To: [EMAIL PROTECTED]
Subject: [filmscanners] RE: Which SCSI Card for SS4000
Hi Tom,
> Actually my SCSI card has automatic termination so I use that and
> thus don't
> have to worry abou
Hi Tom,
> ...my SCSI card is device 7 (the maximum) thus
> auto termination is working.
You know that device ID number and auto termination aren't linked at all.
The SCSI device ID can be anything, the order only matters for boot if you
don't specify a specific device to boot from...at least tha
Actually, I suspect your thinking wasn't correct previously (and it
appears to me your still not set up correctly now). In regard to the
SS4000, this might explain why the 25 pin wasn't working correctly.
Since it was not terminated, in spite of being the last physical device
on that side of the c
SCSI is often not logical when connections get a bit complicated, or
even when they're simple. On my last computer I had 4 SCSI chains; 2
simple ones allowing 7 devices and 2 of the 15 device kind. Some
combinations needed termination in the middle, some termination at
two points and some none. De
Henning,
> SCSI is often not logical when connections get a bit complicated, or
> even when they're simple. On my last computer I had 4 SCSI chains; 2
> simple ones allowing 7 devices and 2 of the 15 device kind. Some
> combinations needed termination in the middle,
There is never any reason to
13 matches
Mail list logo