if this
would help during scanning. Barbara Abel
- Original Message -
From: "Laurie Solomon" [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Thursday, November 23, 2000 5:22 PM
Subject: RE: filmscanners: Scanning negs and white spots
It sounds like your processor used a dirty roller type
BTW I shot a roll of Kodak 100VS and when scanning it noticed circular shapes
at the edge of the frame.
Indicates too rapid drying and/or wrong wetting agent dilution in final rinse IME. It
can often be provoked by squeegeeing film (which removes the surface liquid from the
frame but leaves
Couldn't agree with you more on the 18 year old trainee. As for Photoflo, that was
the
only stuff we had at the time (after I sold my lab, I swore NO MORE LABWORK) and the
secret of that stuff is all in the dilution a drop too much Photoflo and you
spots on
yer film... no forced air
I've just started shooting with slides again and was thinking, boy, this
local Kodak developer is clean! Then my last roll was a mess. Towards the
end of the roll, I tried wiping the slides with a camel hair brush before
blowing it off, and that helped a lot. Until this roll, the blower was the
Frank wrote:
only thing I needed. This last roll also had scratches (mostly horizontal)
all over it.
Glad to know I'm not the only one whose films get mistreated in processing!
BTW I shot a roll of Kodak 100VS and when scanning it noticed circular shapes
at the edge of the frame. I questioned
:[EMAIL PROTECTED]]On Behalf Of Frank Paris
Sent: Thursday, November 23, 2000 10:24 AM
To: [EMAIL PROTECTED]
Subject: RE: filmscanners: Scanning negs and white spots
I've just started shooting with slides again and was thinking, boy, this
local Kodak developer is clean! Then my last roll was a mess
this
is particularly true of b/w, and the solution for b/w is to have the
correct dilution of Photoflo and a dust free drying cabinet...
IME the thing to do is allow the film to dry naturally in a cabinet, not using forced
air, and especially not forced warm air. And PhotoFlo (esp.600) is
Couldn't agree with you more on the 18 year old trainee. As for Photoflo, that was the
only stuff we had at the time (after I sold my lab, I swore NO MORE LABWORK) and the
secret of that stuff is all in the dilution a drop too much Photoflo and you spots
on
yer film... no forced air drying
, 2000 7:16 PM
Subject: Re: filmscanners: Scanning negs and white spots
1. RE: Dust/Scratches: I have been following with some interest and
amusement the thread about people getting rid of dust on negs and
transparencies. The more things change the more they remain the same...
I have been
1. RE: Dust/Scratches: I have been following with some interest and
amusement the thread about people getting rid of dust on negs and
transparencies. The more things change the more they remain the same...
I have been a professional photographer for nigh on 32 years...used to
own a photo lab...a
10 matches
Mail list logo