Peter wrote:
I have done a few tests with my LS-30 using Julian Robinson's method --
see http://members.austarmetro.com.au/~julian/ls2000-focus.htm
I'll have to try this is I get the time.
My results:
*Mounted slide in Slide Mount Adapter -- OK, all sharply focussed
*Strip of film in
mahimahi wrote:
Looking for suggestions as to the best way keep the film flat while
scanning. Thought about glass mounts but I do not mount my images as
the mounts tent to crop the image.
have both a Nikon LS1000
For most scanners film flatness is not critical due to adequate DOF,
My response to Rob Geraghty's comments on the Nikon SA-20 strip film adapter:
Did the focus using the film strip adapter vary depending on where you were
in the strip?
Yes. Curl in the film (transverse and longitudinal) can throw some parts of the
image outside the zone of sharp focus. The
You can get glass mounts from Wess Plastics that show the full
frame.
Looking for suggestions as to the best way keep
the film flatwhile scanning. Thought about glass mounts but I do not
mount my images as the mounts tent to crop the image.
Rob Geraghty wrote
If I recall the original situation correctly it was an LS2000. Are there
problems with film flatness using the film strip holder (as opposed to the
motorised film strip feeder)? The only time I've had focussing issues is
with the film strip feeder at the ends of
