Hi Tom
Sorry to hear about your problem. These ideas
may sound pretty simple, but you never know.
Have you checked the board to board connections,
cables between the radio and computer?
Rick ve3mm
- Original Message -
From:
Tom
Shikoski
To: FlexRadio@flex-radio.b
Ken:
Is this a problem you eventually worked out, or did you "resolve" it by getting a different sound card?
I found Bass-Treble controls in the mixer and put them both center position so that now the low power is uniform across the passband. After re-calibrating the power amplifier, t
Eric:
I did try it with the Beta version 1.3.4 as well, and the same thing happens. Odd part about it is that the signal seems stronger at lower frequency transmissions of PSK (e.g. with the cursor at 14.0703 - with carrier set at 14.0700) as compared with higher frequency transmissions (e.g
I have heard about this before with the Audigy
2 ZS. I think N9VV had this problem for a while. I’m not sure that we
ever got this completely resolved as we were never able to pinpoint exactly
what was going on. I would suggest trying the latest Betas (1.3.x) to be sure
it is not someth
Are there any hardware gurus out there who would be willing
to assist me in tracking down my loss of output power?
I have had a functioning 1W SDR 1k until I added the
ECO’s # 001 and 011. The receiver operates “normally, but I have
lost output. I have available an o-scope, vtvm, and sign
I have been experiencing a strange phenomena on
1.3.4.
Three times since 5/14 when I was
in receive a stronger than normal signal see would throw the
console out of sync. My transmissions were also out of sync.When I close and
then restart the console everything is OK.
I've been operating th
Ken:
It sounds like you don't have the problem I have. I have played with the MIC-GAIN setting and with the console MIC setting, both. The problem is that the ALC kicks in and starts limiting when the output PEP is about 1/4 the setting level, under either TUN or transmit. I am trying to
Normally, that results from a software numeric to text conversion routine when it attempts to convert something that is not a number (NAN).
Gary AI4IN
-- Original message from "Robert Rennick" <[EMAIL PROTECTED]>: --
I'm just curious.
Ocassional I'll get a meter
I'm just curious.
Ocassional I'll get a meter reading of "NaN dbm"
rather than a numerical reading. Meter seems to hang up. Not a
problem I just restart the console program and the meter comes back to
normal.
But, heck what does NaN mean?
Bob K1OC
Here is a question about the ALC on the TX side:
When I calibrate the power amplifier, I can see that the external peak-reading wattmeter corresponds exactly to the calibration level being sought (60 watts) at the end of the process in each band. Yet, when I transmit a tuning tone (TUN) I
Saturday's Teamspeak included a request to report soon any bugs in 1.3.4 since it was the version going to Dayton. Here's one: In 20 M band, I select TUN (having set power to 5 watts for TUN). TX Meter looks fine except when measuing "Peak Pow." That setting shows -376 watts! The actual pe
Can anyone tell me why the 'voice' I hear on
joining the Flex group and leaving it are NOT speaking at normal speed but very
quickly so as to be unintelligible? I have heard it working properly but now its
at hyper speed! Tnx
Mike
Well, I was pretty sure that I had cracked all the problems in the speech
processor code. That was until I tested it on the second sound card
(motherboard AC97) in my PC.
A little background will help to explain the problem. In the VB version of
the processor the sequence was
Speech -> Tx Fi
Hello All,
Regards from Cleveland, Ohio! I am enjoying my
nicely enhanced SDR1000 (Thanks Bob) with excellent receiver performance and
gorgeous receiver features and audio. I love this new radio, but I haven't
been able to make a contact yet. I am sending out a high
level carrier whenev
14 matches
Mail list logo
