I still can't get this to work!!
Is there anybody in the UK, within about 50 miles, who has successfully
installed an external clock into a SDR-1000? I don't know if my problem is my
10MHz source, or my installation into the rig.
Thanks
73
David, G4YTL
A VAC feature that can cause accumulating latency is its automatic
resampling. It is so automatic that you can't easily even tell that
it is working. But there is a way to minimize it and the delays that
it causes.
First run the VAC control panel and start your setup. Observe the
indicated
Hi all,
Havn't seen any response yet to Frank's (OZ0FT) problems from the experts. I
had similar problems in the past which I solved so may be able to help. As this
is a bit specialised, best if you contact me off list Frank.
73, Pete G3LWT
___
Refer to these articles in the KB.
How Often Should I Update my PowerSDR Database?
http://kb.flex-radio.com/article.aspx?id=10394
How to Rebuild a New PowerSDR(tm) 1.x Database
http://kb.flex-radio.com/article.aspx?id=10405
-Tim
From: Don [mailto:[EMAIL
OK, I was on the right path.
Will this result in the loss of the rx filters I created for the various modes?
If so, is there a way to save that info?
Don
- Original Message
From: Tim Ellison [EMAIL PROTECTED]
To: Don [EMAIL PROTECTED]
Cc: flexradio@flex-radio.biz
This is just a test. Don't worry about all of the other set ups, just the TX
profiles.
If it works than you will have to recreate the filter setting unless you have
and are familiar with using Microsoft Access to transfer data between tables in
different databases.
-Tim
A new article has been published in the KB with the title Q10477 - HOWTO: Using
a SDR-1000 with PowerSDR with an Apple Mac Mini graciously provided by Don
W0RXX. You can access the article directly using the following URL.
http://kb.flex-radio.com/article.aspx?id=10477
I'd personally like to
I am experiencing strange problems with my SDR-5000, which have just
recently appeared. Before I contact Flex directly, I thought I would
ask here and see if anyone has experienced a similar situation.
The most visible problem is that a very broad and nasty spur has
appeared on 160 meters. It
I have reloaded the Firewire driver and latest firmware in an attempt
to get a fix on my problem. Now, whenever I attempt to start a clean
and new PowerSDR, it gives the usual message of transferring data
from the EEPROM, then stops and gives the message Bad Data detected
in EEPROM, PA Power
Dave,
There will be some anomalies that you might see either connected to a
dummy load or without an antenna that lay in the noise floor because
the noise floor is so low. Most radios might not even hear or see
their noise because the noise floor is higher and covers these sort
of things
ZS6AVM Wrote :
I quote, Real Radios Don't Need Knobs, so is the SDR-5000C not a real radio ?
Further quote from the Flex Site ;
The FLEX-5000D™ includes everything that is in a FLEX-5000C, including the
integrated computer and adds features such as a 9 LCD display with touch
screen, 300 watt
11 matches
Mail list logo
