Dudley,
If CQ-100 isn't up by the time the net starts I'll have to forgo todays flex
net.
Ted, NX6C
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
I have casually been listening to 6m for the past few days off and on in
between day job work that has consumed another weekend.
The other evening, I fired up the FLEX-5000 on 6m using an 80m full wave loop
tuned resonant to 6m with an antenna coupler (not a tuner). Most of the
propagation was
Using an SDR5000, I have worked the following 19 DXCC's on 6 meters in the last
7 days. Most all of the contacts were on CW. Most all the contacts were
multi-hop sporadic e. The eastern Caribbean stations and EURO stations were
very weak. The opens to state side stuff are single hop sporadic e
This may have been mentioned previously, and if so I apologize, but Is
it possible to get a approximate release date for the new generation
PowerSDR (new codebase)?
As a obsessive cw operator and former owner of a FlexRadio product, I am
encouraged by Frank's remarks.
Best 73/ Kirb - VE6IV
--
Ted,
I did not check my email until after the net, but Doug, VE3EFC sent me
a note discussing what had happed to his ISP servers.
Thanks,
Dudley
WA5QPZ
Hi Dudley,
Just to let you know, There was an explosion and fire at my ISP .
They hope to have 9,000 servers back on line by Sunday
Kirb --
The target for a preliminary suite of programs is Dayton next year. What
that means is, it will be possible to run either the FLEX-5000 or the
SDR-1000 entirely with cross-platform code (including a separate console) in
distributed form (for example, with the console running on one
To all FLEX-5000 users,
Neal, K3NC has just released the latest version of FlexLoader. This version
has several new features along with adding Vista compatibility. You can
find a summery of the new features and fixes listed below.
For those unfamiliar with the FlexLoader, it is a GUI
I believe the plan is to have something functional running by Dayton next
year. There are no promises. If it comes out earlier, then that will be a
gift to us all.
This is a *very* complex piece of software so don't expect to even see parts of
it by the end of the year.
-Tim
-Original
I took some pictures at Dayton, to tell the truth no very many but as
such they are here, some pictures of the Flex crew and Flexers and
the TAPR Booth. Feel free to download the photos and do whatever with them.
http://www.qrpradio.com/pub/Ham/Dayton_2008/
There are two copies of each
I remember hearing about being able to use VAC while operating with a
microphone. There is a new option Allow PTT to override/bypass VAC for
phone. It sounds like this shuts off any VAC audio while transmitting. Is
this true?
I would like to be able to mix microphone VAC when transmitting. One
Steve,
The official version on the WEB site will allow the PTT (w/mic audio) to
over ride the VAC if the checkbox is selected in Audio = VAC tabs..
PL tones will be available after the 2 meter/440 transverter is released
for the 5K within PowerSDR..
73,
Dudley
WA5QPZ
Steve Kallal wrote:
11 matches
Mail list logo
