Hi All,
I want to set up a reference receiver for V/U/SHF and for that purpose I am
looking for a 3 or 4 stack 1W SDR-1000.
ECO state unimportant.
If you have one with a USB-Parallel adapter, I'll take that too :-)
Please send a quote off list to tjoernelundATadslhome.dk (replace AT with @)
http://www.youtube.com/watch?v=v4Wy7gRGgeA
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base:
Well, after many months of nose picking and butt scratching there is finally
progress to report on the FlexWire Adapter. Since the development is still
on-going and will be for a while I have decided to join the blog craze to
report the progress of this project rather than using reflector posts. Th
Can you give us a summery of the high level capabilities of the FlexWire
device?
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Steve Nance
Sent: Saturday, March 21, 2009 12:47 PM
To: ddu...@yahoogroups.com
Cc: 'F
Sure, here are the basic functions. See the blog for a more detailed
description.
Four (4) 8-bit TTL output only ports controlled by DDUtil:
2) ports tied to PowerSDR VHF+ buttons (XVTRs menu)
Sends BCD signals based on which VHF+ button is pressed. Mostly for
transverter control.
1) port tied t
I am currently in QSO with Dudley (WA5QPZ) on 14.314.000
Dudley is running a FLEX-3000 too. The first FLEX-3000 to FLEX-3000 QSO!
Feel free to join is!
-Tim
-
W4TME
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-rad
We have Syed to 14.327.000 MHz
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Tim Ellison
Sent: Saturday, March 21, 2009 3:56 PM
To: 'FlexRadio List'; flexra...@yahoogroups.com
Subject: [Flexradio] FLEX-3000 on the
Boy, I hate spell checkers
We have QSYed to 14.327.000 Everyone feel free to join us. If you can't hear
us, please break in and call CQ. If I can't hear you, Dudley probably can.
-Tim
-Original Message-
From: Tim Ellison
Sent: Saturday, March 21, 2009 4:05 PM
To: Tim Ellison; 'Fl
The PowerSDR feature list indicates there are two S-meter displays that
can be selected - edge type and LED bar graph type. All I've ever seen
is the edge type. How do you change to the LED bar graph type? Can't
find anything about it in KC..
Rod, KQ6F
_
Hello Rod,
You can access it from the 'Setup' menu. Go to: Setup > Appearance > Meter
73, Dale
WA8SRA
Rod Brink wrote:
The PowerSDR feature list indicates there are two S-meter displays
that can be selected - edge type and LED bar graph type. All I've
ever seen is the edge type. How do you
My last official act as chair of ARRL SDR committee was to agree to chair the
SDR FORUM at the Dayton Hamvention.
I solicit talks from individuals, groups, or a business. The talk must be
about SOFTWARE radio. I encourage Elecraft, Flex, TAPR/AMSAT, Quicksilver and
others to participate. I t
Do I have a hardware failure?
I have RX2 installed and it works great with ANT1 tap. However, when I connect
the same antenna to the RX2 BNC connector there is zero signal. Yes, I selected
the correct antenna in the antenna management profile. I also removed the
covers from my Flex 5000A and r
There will be two FLEX-3000s on the air tomorrow (22-March-2009) for the
FlexNet on 20m.
Dudley (WA5PQZ) and I (W4TME) will be operating on the net @ 1800 UTC on 14.329
+/- QRM
-Tim
-
W4TME
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio
OK, well maybe the radio didn't quite win the science fair but the
student who did, Michael Binon, KI6QOC, used a Flex 5000a to collect
data on four different wire antennas he constructed for a backpack QRP
station built by his classmate, Joshua Fournier, KI6PJW. Michael's
project took 1st
14 matches
Mail list logo
