Hi Guys,
This Card works well..." Skymaster Quality Connections " , 1394 PCI
Card. Comes with Full and Half Height Mounting Brackets. Three Port, 6
Pin...one Port on the inside of the Computer, presumably to let you take
a lead out to the Front.
I had no luck with three Toshiba Laptops ( Lat
Well Guys,
No fun here today. New computers can be a pain.
I just received a new HP (Intel 3.2 Gig) Quad Core computer with 8 Gigs of
memory & no Firewire card. The operating system is currently Vista 64 Bit
Business with an upgrade to Windows 7 shortly. Empty card slots are PCI X 1
(PCI Express)
Email to sa...@flex-radio.com is bouncing at the moment.
Would someone tell me which of these wirings would work best with the F5K:
http://www.epanorama.net/circuits/microphone_powering.html
Paul Delaney
paul.hamra...@verizon.net
k...@k6hr.ampr.org
http://k6hr.dyndns.org:8080
___
The headset adapter is for the Heil traveler headsets. It might work. Heil
doesn't publish the schematics for their connectors so it is hard to say. You
can drop a note the FlexRadio Sales (sa...@flex-radio.com) and ask them.
-Tim
-Original Message-
From: paul [mailto:paul.hamra...
Unfortunately there are no markings on the headset other than the brand
name. The microphone terminates to an 1/8" three conductor male plug. It
works with my Icom rig, but the 8pin mic jack for the Icom was sealed with
hot glue by the guy that built it so I cannot reverse engineer it. I see a
Jordan
what preselector do you use?
73 W9OY
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Kno
I believe the Logitech headsets use electret microphones and therefore need
a bias voltage and isolation capacitor.
73,
Mack de WB4MAK
www.nfarl.org
www.sedxc.org
--
From: "Tim Ellison"
Sent: Monday, September 28, 2009 21:00
To: "paul" ;
Subjec
What radio are you using?
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of paul
Sent: Monday, September 28, 2009 8:53 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Front Mic Connector Not Working
I have the mi
I have the mic enabled in the mixer section and have the mic gain set. I
have my Logitech headset mic wired to pin 7 and 8 but no joy. Could there be
anything else in PSDR that I could have overlooked?
Paul Delaney
K6HR
___
FlexRadio Systems Mai
On Mon, Sep 28, 2009 at 4:44 PM, Robert Jefferis wrote:
> ECO (engineering change order) sometimes also means either: (1) doggone it,
> that part is no longer available, what do we do now? , or (2) , if we
> changed this part, or procedure, we could save X cents per unit in
> production cost. ECOs
ECO (engineering change order) sometimes also means either: (1)
doggone it, that part is no longer available, what do we do now? , or
(2) , if we changed this part, or procedure, we could save X cents per
unit in production cost. ECOs can be spawned for many legit reasons,
mostly not 9but s
Welcome to the club.
Glad you got your system up and running.
No go and get ready to work the FT5GA
Remember, there is a contest almost every weekend.
On 9/28/2009 5:46:38 PM, Brett Gazdzinski (brett.gazdzin...@verizon.net)
wrote:
I received my 5000a today, and it fired right up!
It took me a
I received my 5000a today, and it fired right up!
It took me about 10 minutes out of the box to be using the radio!
No issues at all, loads of fun, really nice!
It seems to work fine with my old slow sony laptop, with its built in
firewire port.
I think it runs about 30% cpu usage.
I think may
Just a reminder that I sell them at a $5 discount from the list price.
73
Neal Campbell
Abroham Neal Software
www.dxbase.com
www.abrohamnealsoftware.com
www.sdrsystems.com
(540) 242 0911
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog/
DXBase bug reports: email to ca...@dxbase.f
I don't know.
I am trying to get FlexRadio to carry them. I am almost there :-)
-Tim
-Original Message-
From: Ray Andrews, K9DUR [mailto:k9...@rnacs.com]
Sent: Monday, September 28, 2009 3:33 PM
To: Tim Ellison; 'elan paim'; flexradio@flex-radio.biz
Subject: RE: [Flexradio] high spe
Tim,
They are a couple of bucks cheaper than Granite Digital, also.
Granite Digital also ships world wide. However, their shipping charges to
Denmark, for example, are $90 or more. I wonder what MacGurus charges
73, Ray, K9DUR
http://k9dur.info
Stop the presses! My answer for this was 100% dead wrong.
I missed the part about getting Granite Digital cables shipped to the EU.
Asleep at the wheel, I was.
The company listed below WILL ship granite Digital high quality Firewire cable
to the EU. I just confirmed it with their sales dept.
Merci beaucoup!
I am down to an order backlog of 2 machines so the delay will not be too bad
if you order (2-4 days)!
Neal Campbell
Abroham Neal Software
www.dxbase.com
www.abrohamnealsoftware.com
www.sdrsystems.com
(540) 242 0911
Amateur Radio: K3NC
Blog: http://www.abrohamnealsoftware.com/blog
At 06:42 AM 9/28/2009, Ray Andrews, K9DUR wrote:
If we consider the
antenna system to be the source and the RX input circuit to be the load,
matching the antenna impedance to the receiver input impedance results in
maximum signal transfer, i.e. - maximum signal strength at the receiver.
True, b
Or one of Neal's PCs that is made specifically for SDRs.
-Tim
Sent from my iPhone
On Sep 28, 2009, at 1:36 PM, "George Allen" wrote:
> My feeling is that it is better to get a "Shuttle" as a dedicated
> computer to solve the issues.
>
> George
>
> -Original Message-
> From: Car
My feeling is that it is better to get a "Shuttle" as a dedicated
computer to solve the issues.
George
-Original Message-
From: Carl N9GC [mailto:wc0...@embarqmail.com]
Sent: Sunday, September 27, 2009 2:21 PM
To: FlexRadio@flex-radio.biz
Subject: [Flexradio] Fw: PowerSDR problems - ol
Contact the EU Service Center
http://www.flex-radio.com/Support.aspx?topic=service
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of elan paim
Sent: Monday, September 28, 2009 1:16 PM
To: flexradio@flex-radio.biz
Subje
the company on flex page will ship only in U.S
I am in EU.
E&T Paim
--- On Mon, 28/9/09, elan paim wrote:
From: elan paim
Subject: high spec firewire cable where
To: flexradio@flex-radio.biz
Date: Monday, 28 September, 2009, 5:51 PM
is any one know where i can get this good cable i n
Nice idea Dan but very difficult for any company to handle.
Something I and most hams have learned over the years, if your radio is
mission critical to you, you best get a back up radio. I bought a 746PRO for
that very reason. A nice used FT-101 or TS-520 among others (circa
1970-1980) is cheap an
http://www.granitedigital.com/firewireproducts.aspx
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of elan paim
Sent: Monday, September 28, 2009 12:51 PM
To: flexradio@flex-radio.biz
Subject: [Flexradio] high spec firewire cab
is any one know where i can get this good cable i need x3 ?
http://kc.flex-radio.com/KnowledgebaseArticle50400.aspx?Keywords=firewire
thank you
Elan
E&T Paim
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailma
How about this -You get a RMA and you are told when to send in the
unit for the least down time at Flex.
In my case I'm told the bride diode is out in my 5000A. Estimated
repair time is 3-4 weeks , I operate on a 75 meter net each night
so I'm going to be off the air for about a month.Thats a
Using a preselector for receive has allowed me to increase S/N on several
bands, and almost all frequencies outside of the ham bands with my
Flex5K
It also helps in reducing or removing some of the images and spurs found
below 8 Mhz.YMMV, but not too much hihi
73...Jordan VE6ZT
--
On Mon, Sep 28, 2009 at 6:05 AM, Tim Ellison wrote:
> Second, "antenna tuners" are devices that has been misnamed for years. They
> are not actual tuners in relation to frequency, but impedance matching
> devices as you noted below. There are several impedance matching circuits
> used for th
I have generally good results with the MFJ 998. There is a free program
that provides control and display from the local PC with a serial port.
Jim wrote:
I wanted to ask the more experienced antenna/flex folks about a thought I
had regarding the efficacy of an external antenna tuner instead o
And in some cases it means:
Jeez...we can get a 1dB lower noise floor without these back to back diodes
across the input. OR, Wow... these new transistors have much better IMD
specs in our circuit
It also can mean things like:
"These new devices meet the new OHSA requirements"
73...J
On Sun, Sep 27, 2009 at 4:46 PM, Greg Jurrens wrote:
> Burt:
> Sri... 2 mny TLAs! (Three Letter Acronyms)
> ECO stands for Engineering Change Order. It's the formal process for making
> a change on the production line. It forces us GEEKS to actually document
> what we want done and then be
Tim,
I would like to take respectful exception to one of your statements: "Some
offer, at best, only marginal benefits for RX, because there is no real
"tuning" per se going on, just matching the impedance of the transmitter's
output to the radiator (antenna and coax) that is attached."
It is a w
Jim,
First off, you are correct that in the FLEX-5000 family of SDRs, because they
are full duplex (separate RX and TX signal paths), the ATU is only in the TX
signal path (between the PA and the HRFIO board).
Second, "antenna tuners" are devices that has been misnamed for years. They
are no
Well, not sure if there is a more relevant discussion board (yahoo
ham-antennas?), but regarding SWR...if the tuner can get a match then the
biggest concern is: what is the loss of the feedline, and is the feedline
radiating unintentionally. Some coax with high SWR can be very lossy, some
coax and
I wanted to ask the more experienced antenna/flex folks about a thought I
had regarding the efficacy of an external antenna tuner instead of the
internal atu offered for the flex 5000a.
I personally did not have great luck with the internal antenna tuner so I
finally purchased an external MFJ -
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160363868852&ssPageName=ADME:X:RTQ:US:1123
i just bought one it is the same as syba card that show on flex web page
E&T Paim
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.fle
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=160363868852&ssPageName=ADME:X:RTQ:US:1123
i just bought one it is the same as syba card that show on flex web page
E&T Paim
--- On Mon, 28/9/09, Dudley Hurry wrote:
From: Dudley Hurry
Subject: Re: [Flexradio] Which Firewire card to buy..
To
38 matches
Mail list logo
