__ Information from ESET NOD32 Antivirus, version of virus signature
database 4739 (20100103) __
The message was checked by ESET NOD32 Antivirus.
http://www.eset.com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http
Thanks Larry, I got it! You're not kidding, tuning is considerably faster!
I use HRD to tune my 5000. Used to be quite a long delay when I dragged the
tuning slider across the band. It has improved a lot!
Thanks for the link!
Paul Delaney - K6HR
- Original Message -
From: Larry da
Ray,
Thanks for the warning. I haven't tried to modify the database, but will be
sure to backup the current one first. I looked at the BandText for 222 MHz
and found the following:
BandText
Low222.15/Low
High222.24/High
Name1.25M Local Option/Name
TXtrue/TX
/BandText
I am really having trouble getting a copy of an IQ file upon which I can
demonstrate any kind of AGC problem. I want to fix this but if I cannot
hear, see, etc. it in action, I am unable to perform a diagnosis.
I need before and after IQ files.
1) Find an AM station exhibiting the problem.
And watch out for microphone extension cables. The one I bought at Fort
Wayne was wired for Kenwood, so the wrong conductor was shielded. I had
to rewire it.
73
Alan NV8A
On 01/02/10 09:53 pm, Tim Ellison wrote:
Yaesu
See page 10 in the SDR-1000 Operating Manual.
I've experienced the raspy audio here also:
F3K + 1.2.5.6 firmware
Firewire 3.5.0.7171
PowerSDR 1.18.3
OS Win 7 32 bit
PC Lenova T400 Thinkpad 4gb ram
If anyone at flex would like to hear what this sounds like, here are two
audio wav files of the same station (20 meter SSB) before and after I
Hello Flexers...
I am replying en-masse so that perhaps others can re-create this problem...
I've spent the last 2hrs scanning for weak AM SWBC stations, and find that
the problems occurs on almost any weak AM signal using either Slow or Long
AGC settings as long as there are a few random
I have a Heil PR-781 and a F5K - what is the recommended cable configuration
for this setup? I currently don't own any audio equalizer or other audio
processing hardware and expect to use the software EQ built into PowerSDR.
--
73's
N7BCP
___
Reading the 5K doc it suggest using a mic preamp when using this connection
- so will I need a preamp with the PR-781? Also wondering if not having the
20db preamp via the front mic connector will be a problem? Thanks.
1/4” TRS jack to connect to audio processing equipment supplying balanced
Larry,
There is enough gain with the 781 mic to the rear. I've done it..
73,
Dudley
WA5QPZ
Larry da Ponte wrote:
Reading the 5K doc it suggest using a mic preamp when using this
connection - so will I need a preamp with the PR-781? Also wondering
if not having the 20db preamp via the
10 matches
Mail list logo