My new SDR 1500 ver 2.06 @ 5 watts 14.056 MHz
Windows 7 into Parallels on Mac
Cubex quad at 40'
>From NH to North Dakota K0HL/mobile
559 CW received - 599 to Ken
My XYL says it was luck. It was Software Defined Nirvana!
Tnx Flex Engineers!
73
John/WD1V
www.wd1v.net
Sent from my iPad
_
Preston
There are known issues with VAC 4.10 -- it is best to use 4.09, both can be
downloaded after you have purchased .
Dave W0DHB
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of pdougla...@aol.com
Sent: Friday, July 30,
No there is not a fix in the works. It has already been delivered in PowerSDR
v2.0.6 Beta. It does require a firmware upgrade for the FLEX-15000 too. This
was covered on the FlexEdge reflector which is the primary reflector for
information regarding beta software which is probably why you did
Is there a fix in the works to correct the full blown volume of the CW monitor?
TX Monitor volume does nothing. If you're wearing headphones or have the
output fed into speakers make sure that you use ear plugs.
The only way to lower it that I've found is to drop the power level.
George
N7
Dale,
I'm not an authority. However, I did NOT install 2.06. Instead I installed
2.05 which is also available for download. This is because there is a
recognized bug in .06 that does not allow VAC transmitting. Since I am very
interested in PSK31 and SSTV modes, this meant that 2.06 w
5 matches
Mail list logo
