Re: [Flexradio] 2nd rx calibration on every update software??

No. Only run the calibrations when instructed to by PowerSDR or Dudley @ FlexRadio Support. -Tim From: paim [mailto:paimg0...@btinternet.com] Sent: Friday, August 06, 2010 2:09 AM To: Robert Bajuk; FlexRadio@flex-radio.biz; Tim Ellison Subject: Re: [Flexradio] 2nd rx calibration on every updat

Re: [Flexradio] 2nd rx calibration on every update software??

hello do i need to do calibration for the 2ND Rx on every new update software?? i was thinking i need to do it just when install ? any help on this one thanks elan g0uut E.P   --- On Fri, 6/8/10, Tim Ellison wrote: From: Tim Ellison Subject: Re: [Flexradio] RX1 Image Calibration error (Fle

Re: [Flexradio] New blog entry on telling if your computer will work with SDRs

Update your BIOS and the chipset drivers which should have the network driver in it. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Burt Sent: Thursday, August 05, 2010 8:03 PM To: Neal Campbell Cc: flexradio@flex-

Re: [Flexradio] RX1 Image Calibration error (Flex-5k)

That is good info to know. I'll add it to the bug report. -Tim From: Robert Bajuk [mailto:rba...@gmail.com] Sent: Thursday, August 05, 2010 7:33 PM To: Tim Ellison; FlexRadio@flex-radio.biz Subject: Re: [Flexradio] RX1 Image Calibration error (Flex-5k) Tim, I went back to 1.3.0.8 firmware and

Re: [Flexradio] New blog entry on telling if your computer will work with SDRs

I would guess your network adapter is tied to the IRQ of your firewire card! 73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com A

Re: [Flexradio] New blog entry on telling if your computer will work with SDRs

My average was 1000us, but when I ran the Flex PDR it changed little until I used the internet at the same time, than I had a peak of 25,000us and PDR stopped --- On Thu, 8/5/10, Neal Campbell wrote: > From: Neal Campbell > Subject: [Flexradio] New blog entry on telling if your computer will

Re: [Flexradio] RX1 Image Calibration error (Flex-5k)

Tim, I went back to 1.3.0.8 firmware and PSdr 1.18.16 and RX1 & RX2 calibration worked OK, no errors. I tried again with 2.0.27 firmware and PSDR 2.0.7 and I got same error on RX1, RX2 passed OK. 73 Robert, S57AW 2010/8/6 Tim Ellison > OK. That helps. > > I am adding you issue to the develop

Re: [Flexradio] RX1 Image Calibration error (Flex-5k)

When you reset your BD, are you changing anything in it before running the tests? I cannot reproduce this problem. -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Robert Bajuk Sent: Thursday, August 05, 2010 6:24 P

[Flexradio] RX1 Image Calibration error (Flex-5k)

Hello, I am trying to calibrate RX1 and RX2 Image, RX2 passed without problem but error PSDR crash on RX1 calibration attempt. Any idea? SETUP: Flex-5000a Firmware: 2.0.2.7 Driver: 3.5.2.8028 Same problem on 2 different PCs: Win XP or Win 7 Same issue on PSDR 2.0.6 or 2.0.7 (Both fresh install)

Re: [Flexradio] New blog entry on telling if your computer will work with SDRs

On 8/5/2010 10:52 AM, Neal Campbell wrote: You might want to read my latest blog if you are wondering if your computer (or potential purchase) is suitable for your new radio! http://www.abrohamnealsoftware.com/blog/ I hope it is helpful! Very useful Neal! Thank you for sharing the information

Re: [Flexradio] New blog entry on telling if your computer will work with SDRs

VERY NICE job neal...fills in several gaps in the eternal question 'how much pc...' hope someday you will elaborate on L-2 and L-3 cache, Passmark CPU ratings,CPU speeds, DDR-3 RAM, and merits of multi-core CPU's...IF they make any difference.. nice work...73, w5xz, dan --- On Thu, 8/5/10, Neal

[Flexradio] New blog entry on telling if your computer will work with SDRs

You might want to read my latest blog if you are wondering if your computer (or potential purchase) is suitable for your new radio! http://www.abrohamnealsoftware.com/blog/ I hope it is helpful! 73 Neal Campbell Abroham Neal Software Blog: http://www.abrohamnealsoftware.com/blog/ ___

Re: [Flexradio] New Version of SDRDataTransfer Setup Data Available

WARNING: Shameless plug ahead. The PowerSDR Data Transfer program is a really great application and an essential utility for anyone using PowerSDR. Ray has provided this application to the public as "donationware", which is essentially "freeware" (although his time, IDE expense and effort put

[Flexradio] New Version of SDRDataTransfer Setup Data Available

There is a new version available of the setup data for the SDRDataTransfer utility. This new setup data can be downloaded using the facility built into SDRDataTransfer. FLEX-1500 Users -- It is VERY important that FLEX-1500 users update to this latest version of the setup data as soon as possible

[Flexradio] SDRDataTransfer v3.3.6 Released

Thanks to Rick, K7ET, for spotting a typo that has been in the program update message since v3.3.0! SDRDataTransfer.exe v3.3.6 has been released & is available for download from my website or through the program feature of the utility itself (v3.3.0 or later). The only change is to correct the ab