Re: [Flexradio] New 5000A User - TX Audio (severe distortion) Issues

The rear 1/4" mike input seems much less prone to RFI issues than using the eight pin connector on the front. Also use the rear RCA for PTT. Be sure to check the box for mike gain in the main menu or you might find that you have to run a lot of gain on the "radio" screen slider. Adjust t

Re: [Flexradio] Bad PHONE audio output

Whoops. I read this incorrectly. Your issue *is* with the phones output and not VAC. My bad. Make sure that the load on the phones is at least 32 ohms and are truly stereo (http://kc.flexradio.com/KnowledgebaseArticle50453.aspx) Also there is a bug in PowerSDR v2.0.16 where the if the AF gai

Re: [Flexradio] Bad PHONE audio output

This is the trouble when you have multiple amplifiers (gain stages) in the audio signal chain. If your input gain to the last stage is too high and is distorting, you destroy your SNR and then the sound card just amplifies the poor signal and the included noise. Connect headphones or computer

Re: [Flexradio] Bad PHONE audio output

Hulen, What kind of audio distortions are you hearing? Is it at high volumes? 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: dud...@flexradio.com Web: www.flexradio.com "Tune in excitement!" ™ On Mon, Dec 6, 2010 at 5:08 PM, Hulen Smith w

[Flexradio] Bad PHONE audio output

ALL, I'm having distorted audio output from the 1500 phone audio port. If I use VAC and redirect the audio to my USB phones all works well but with increased latency. Is anyone else having this issue or could this be a configuration error on my part? I'm using 2.0.16 software (special load from F

[Flexradio] S-meter reading

Hello, I've been thinking about that for a long time, and decided to make the modification last week-end : In Power SDR, instead of reading the signal strength in dBm, i wanted to have it in the form S 5 or S 9 + 10, etc. Not a great enhancement, but I find it's a comfortable reading fo

[Flexradio] RoMac CWider

After talking to Dudley the Ider is working with VAC turned on. However, I use VOX not PTT, with VAC turned on VOX doesn't work. I've "checked" and "unchecked" a lot of boxes and nothing seems to allow VOX to work.  Radio is a 5000a Jim, K5TC __

Re: [Flexradio] flex 3000

Hi Glenn I assumed the '3 gig' reference was the processor speed so its the memory spec. What is the speed of your CPU? 73 Neal Campbell Abroham Neal Software Big Christmas Sale - 10% off Computer Systems www.abrohamnealsoftware.com (540) 645 5394 On Sun, Dec 5, 2010 at 9:48 PM, Glenn Collin

Re: [Flexradio] flex 3000

Glenn: That is not a lot of memory for Windows 7-64. I think the guys like Neal who know a lot more about Windows 7 than me would recommend 4 Gig minimum and preferably 8 Gig for Windows 7-64. Apparently you end up with the computer doing a lot of memory-disk swapping if it does not have access t

Re: [Flexradio] New 5000A User - TX Audio (severe distortion) Issues

Bradley, I am certainly no expert in the RFI area and I may get in trouble if I try to diagnose your situation. The articles should be of help and there are many people on the reflector with much more knowledge than I. You may want to tap further into the reflector resources. On the microphone

Re: [Flexradio] crackling noise

Thanks Tim and Gerald and Graham and All: Almost certain it's the graphic card. On the crackling PC the CPU runs at 30% or less and CW is okay. If I run packetspots or other programs (F-Secure virus software is a suspect) CPU goes up past 50% and CW starts to drop characters. Turning off displa

Re: [Flexradio] File management

You can also try right clicking on the file and selecting the Properties menu item. On the 'General' tab, at the bottom will be a section for Attributes. If there is an Unblock button, click it. 73, Jim KA2RVO On Sun, Dec 5, 2010 at 9:23 PM, Neal Campbell wrote: > Hi Pierce > > Ignore the nat