I think you need to switch the vac channels at one end or the other. The
output of powersdr should go to the VAC channel that is the input of skype
on your remote computer.
What is the nature of the latency you are asking about?
73 - Mike WA8BXN
I am attempting to setup my Flex-3000 for remote operation using
Teamviewer and Skype. I have Teamviewer working OK except that it seems
to have quite a bit of latency at times when using Wifi. If anyone has
suggestions for decreasing this latency when using Teamviewer, I would
appreciate the h
With your particular remote setup, how do you protect against loss of
Internet during transmit? Some kind of timeout is a requirement that needs
to be met and I wonder how you are doing it? Is VOX dealing with this in
the same way?
Gary
AI4IN
-Original Message-
From: flexradio-boun...@f
Guys, the new software loaded and works fine. The ALC works now, finally
and the output power is under control for the very first time on my 5000.
The only issue I found in the new SDR RC2 software was that VOX on VAC
does not work. Did I miss a new check box?? It seems that VOX was workin
Yes, it you use something like IP Sound or Skype via VAC channels for audio
input and output. This is covered in the Knowledge Base (KB). Simple KB key
word searches are your friend.
http://kc.flexradio.com/KnowledgebaseArticle50255.aspx
-Tim
-
W4TME
-Original Message-
From: fl
Yes, you can get audio sent in both directions, but you need to do some
things to make that happen. Some use Skype for the audio. You will need to
buy the VAC (Virtual audio cable) program (worth the low price).
Thats the short answer, the details are available somewhere I'm sure!
73 - Mi
In another post I missed if using remote control, is the Flex sound
available at the remote location?
--
You cannot change history, but you can make history!
Education is the only legal cure for stupidity.
___
FlexRadio Systems Mailing List
FlexRadio@fle
I have loaded PowerSDR v2.0.20 RC2 and my CWX is working at 30 wpm. However, I
noticed the following odd behavior: the CWX "drop delay" value is not
functional but is controlled by the "Break in delay" value that is assigned
using the Front Console CW-keyer controls. This really is not a probl
8 matches
Mail list logo
