[Flexradio] SDR 1000 oscillator

Anyone out there still using the SDR 1000. The external oscillator (isotemp ocx01310-100) that came with my recently purchased SDR 1000 is not working properly.The radio was recently returned from Flex and  I was advised that the oscillator is very unstable and should be replaced. I would like

Re: [Flexradio] ATU Problem on flex-5000a

Hi Tim, Actually, Klaus pinged me last night and it turns out it wasn't a hardware problem but a EEPROM config issue... although installed correctly, it was configured for the older version of the ATU and not the new rev B board. Once the EEPROM was corrected it immediately started tunnig

[Flexradio] TX Audio Chain

Hello All: Have been reading K0DAN's explanation of the many adjustments points in the TX audio chain. At the risk of seeming too Amateurish is there a Knowledge Center article that sets out a step by step procedure in setting up good quality audio? I must confess I basically plugged in the

[Flexradio] Looking for a 5000A

Hi all,     I just sold my 5000C and want to replace it with a 5000A. Second rx is a must, however Antenna tuner is not necessary. Tuner can be in the package, but is not a deal breaker.                                                                     73  Paul w8jn

Re: [Flexradio] Looking for a 5000A

Flex will probably be having some deals starting next week for Dayton. If it is the same as last year, you do not have to be at Dayton to get the special pricing -Tim -Original Message- From: flexradio-boun...@flex-radio.biz [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of

Re: [Flexradio] Looking for a 5000A

Tim, thanks! Sent from my HTC Touch Pro2 on the Now Network from Sprint®. -Original Message- From: Tim Ellison telli...@itsco.com Sent: Tuesday, May 10, 2011 12:38 PM To: paul glassman highschooldiv...@yahoo.com; FlexRadio Reflector flexradio@flex-radio.biz Subject: RE: [Flexradio]

Re: [Flexradio] TX Audio Chain

Larry, I emailed a step-by-step article to Neal today for consideration as a possible addition to the Flex Wiki. Most people do exactly what you and I did, plug in a mic, adjust the mic slider in the GUI, and run with it. The necessary information is spread throughout the manual, but as I

Re: [Flexradio] TX Audio Chain

On Tue, May 10, 2011 at 12:16 PM, W1AEX - Rob w1aex.f...@cox.net wrote: Larry, I emailed a step-by-step article to Neal today for consideration as a possible addition to the Flex Wiki. Most people do exactly what you and I did, plug in a mic, adjust the mic slider in the GUI, and run with

Re: [Flexradio] TX Audio Chain

I think these are excellent instructions and advice !! Ted, WB2LOU On Tue, May 10, 2011 at 3:16 PM, W1AEX - Rob w1aex.f...@cox.net wrote: Larry, I emailed a step-by-step article to Neal today for consideration as a possible addition to the Flex Wiki. Most people do exactly what you and I

Re: [Flexradio] TX Audio Chain

I put the great article by Rob on the Flexradoiowiki.com site so its there if you ever need it again! Thanks Rob for the excellent work, Neal On Tue, May 10, 2011 at 3:46 PM, Ted Trostle tctros...@gmail.com wrote: I think these are excellent instructions and advice !! Ted, WB2LOU On Tue,

Re: [Flexradio] TX Audio Chain

Thank you Rob! Bob N4HY On Tue, May 10, 2011 at 3:16 PM, W1AEX - Rob w1aex.f...@cox.net wrote: Larry, I emailed a step-by-step article to Neal today for consideration as a possible addition to the Flex Wiki. Most people do exactly what you and I did, plug in a mic, adjust the mic slider in

Re: [Flexradio] TX Audio Chain

Thanks Rob - Very well written. Are Flex folks great, or what? 73 Larry - Original Message - From: W1AEX - Rob w1aex.f...@cox.net To: flexradio@flex-radio.biz Sent: Tuesday, May 10, 2011 3:16 PM Subject: Re: [Flexradio] TX Audio Chain Larry, I emailed a step-by-step article to

Re: [Flexradio] TX Audio Chain

On 5/10/2011 12:16 PM, W1AEX - Rob wrote: I emailed a step-by-step article to Neal today for consideration as a possible addition to the Flex Wiki. Most people do exactly what you and I did, plug in a mic, adjust the mic slider in the GUI, and run with it. The necessary information is spread

Re: [Flexradio] TX Audio Chain

Is the Mixer dropdown in the console the very first gain stage in the Flex5000A and if so, what is the decending order of variables...does it follow in sequence with the TX Meter dropdown settings? [Mixer], MIC, EQ preamp, Leveler, CPDR/DX button? 73 Mike, K4EAR -Original Message- From:

Re: [Flexradio] TX Audio Chain

See the following: http://kc.flexradio.com/KnowledgebaseArticle50478.aspx The Mixer gain is essentially the input gain control for the codec. I have done a lot of experimentation with it and this is what I think sounds best, but the difference is almost imperceptible. I use outboard audio

[Flexradio] Flexradio Google Theme

It 'think' the Flex5K/DDUt theme has finally been added to Googles theme list. Anyway, I 'think' if your use Google Desktop Themes, a search on Flex5K/DDUt should give your the simple them I created. -- --- Watch where you point that thing, Tom said carefully.