Pete,
You should be OK if you do not get this error on subsequent restarts of
the radio and PowerSDR. If you encounter any strange problems, please
drop us an e-mail at supp...@flexradio.com so we can open a ticket and
investigate further.
-Tim
---
Tim Ellison, W4TME
Internet Systems
Need a little help here, this morning I was working WSJT 441 mode
on 6m . I had the Flex 5000a set to 75 watts . All qso's were going
pretty fast so I wasn't TXing very long . I was making another call
when I looked and the F5K was only doing Like 10 watts .. Thinking
the radio was hot I
test
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flexradio.com/ Homepage:
When you checked the other bands, were you using the same modulation
method and output AF gain settings for the test?
If so, then you probably should contact Support (supp...@flexradio.com)
and open a helpdesk ticket for further triage. You may need a PA power
calibration for 6m.
-Tim
---
Although I do not fully understand your statement Since I use RX1 with
VAC for digital stuff I am out of luck! Can you explain this in more
detail?
It means for me that I cannot make use of the panel since I have to use V/U
on RX2.
(RX1 is the only receiver that will work with VAC for my
OK. Now I understand. Thanks for the clarification.
That enhancement request for RX2 support in the memory form has already
need entered into the database for future considerations.
Tim Ellison, W4TME
Internet Systems Admin. Customer Support Engineer
FlexRadio Systems^(TM)
4616 W Howard Ln
I had already updated to PSDR 2.1.5 and it has been working OK here.
This morning I was listening to my regular swap net but did not check in
since I had some work to do outside.
Went to work some DX this afternoon and I have no audio output. CW is
working fine. I have the mixer set
Never mind.
Faulty SO2R switch...
On 7/31/2011 4:11 PM, Greg wrote:
I had already updated to PSDR 2.1.5 and it has been working OK here.
This morning I was listening to my regular swap net but did not check
in since I had some work to do outside.
Went to work some DX this afternoon and I
I sincerely am not meaning to make fun of Greg but this is an example of my
method of problem analysis!
I always assume that the most expensive part in the chain is the one that
is broken! Always!
8 years ago my ring rotor stopped turning. It was winter, I had been reading
somewhere stories of
9 matches
Mail list logo