Rick, Works great. I have a F5000, PSDR. Uses same VAC in/out as other
programs. I use the DIGIU mode so you can set the levels from the main
screen. Receive level is fairly important.
Digital pictures are really crisp and clear. This is a digital only software
and will not decode analog, so keep
Rick,
Have a look at the flexwiki page ...
http://flexradiowiki.com/frsradoiowiki/index.php?title=EasyPal
Al, K0VM
On 8/25/2011 12:00 PM, flexradio-requ...@flex-radio.biz wrote:
Date: Wed, 24 Aug 2011 23:31:47 -0400
From: Richard Lawnrjl...@gmail.com
To:flexradio@flex-radio.biz
Subject:
You didn't say if you are using separate computers but I would assume you
are. I know this is obvious (ducks any flying objects hurled in his general
direction) but did you try swapping the controls to see if the problem
follows? Double check your port assignment to make sure it's where is
Tnx to all for advise on using easy pal with my flex. Looks pretty straight
forward and I'll try and set it up this weekend while we sit around and get
hammered by the hurricane. First an earth quake and now a hurricane!
Rick
W2JAZ
On Thursday, August 25, 2011, flexradio-requ...@flex-radio.biz
Just reloading re-built PC:
ASUS M4N75TD, 4 core amd945, 8g ram, no page file.
Just basic loaded win7.
dpclat shows DPC in 2500 range, latencymon show around 100-130.
Added sp1, no change!
Who do I believe??
Jim
W4YXU
___
FlexRadio
When I run both, they show essentially the same latency numbers. Look
at the real time numbers, not max spikes.
LatencyMon will tell you what is causing the excessive DPCs and ISR as
well as page faults. dpclat just give the max latency numbers. I
prefer to use LatencyMon as it is a
For Information
--- Forwarded message ---
From: FlexRadio Support, Dudley Hurry supp...@flex-radio.com
To: les...@internode.on.net
Cc:
Subject: Re: [FlexEdge] No microphone audio on all bands all modes
Date: Thu, 25 Aug 2011 13:45:42 +1000
Les,
Glad you got it going You might
7 matches
Mail list logo
