With the release of V2.2.2, I had hoped that this problem got resolved,
but no luck!
I believe some time ago it was stated that the problem of ATU settings
by band got fixed (forgot what version).
Can someone please verify...
Hardware F5K/RX2/V/U
V2.1.5. 2.2.2
Try this:
- Database Factory
In listening to the rig just now it almost seems like the background hiss is
too quite.
Also I could see a CW signal i n PSDR but there was nothing showing for a CW
sig in SKimmer. Weird.
Anyways, here are my settings.
Zack
N8FNR
___
PC OS XP SP3
Have you tried WDM driver ?
I'm using that and Cwskimmer is decoding fine.
Dave
W0DHB
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of vtnn...@comcast.net
Sent: Saturday, August 27, 2011 1:00 PM
To: Flex Radio
Subject:
Yes I have but it made no difference
Zack
- Original Message -
From: Dave Beumer WØDHB d...@w0dhb.net
To: vtnn...@comcast.net, Flex Radio flexradio@flex-radio.biz
Sent: Saturday, August 27, 2011 3:46:34 PM
Subject: RE: [Flexradio] My settings - Skimmer does not seem to
I use WDM-KS for almost all installations and usually the RX gain for VAC is
-10 to -8 or so. Also make sure spike Repression is not turned on!
On Sat, Aug 27, 2011 at 3:46 PM, Dave Beumer WØDHB d...@w0dhb.net wrote:
Have you tried WDM driver ?
I'm using that and Cwskimmer is decoding fine.
Neal
Spike Repression ? Is that in PowerSDR or CWSkimmer ?
Do you know how to view more than a 24kz bandwidth ? I remember seeing a
solution a while back .
Dave
From: Neal Campbell [mailto:abrohamn...@gmail.com]
Sent: Saturday, August 27, 2011 1:54 PM
To: Dave Beumer WØDHB
Cc:
Try these changes:
Uncheck combine VAC channels
Do not check RX2 unless you are receiving signals from RX2 you want to
decode
-Tim
---
Tim Ellison, W4TME
Product Management, Sales Support
FlexRadio Systems™
4616 W Howard Ln Ste 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email:
Its the SR button in PSDR below the pan adapter and VFOA (in the group with
NB, NB2, etc)
You can drag the Skimmer window to expose more frequencies, have you tried
that??
73
On Sat, Aug 27, 2011 at 4:30 PM, Dave Beumer WØDHB d...@w0dhb.net wrote:
Neal
** **
Spike Repression ? Is that
I doubt this is defined as a problem that prevents people from
operating, or that it is considered a problem at all. You change band,
obviously the tune established for one band is not the same, so it goes
into bypass, as that would be better than transmitting into a tune setup
for another
I agree with Steve's reply 100%. My 2 cents
Chuck K1KW
- Original Message -
From: Steve Sterling f...@sgsterling.com
To: flexradio@flex-radio.biz
Sent: Saturday, August 27, 2011 4:42 PM
Subject: Re: [Flexradio] Old ATU problem
I doubt this is defined as a problem that prevents
I unchecked combine VAC channels and unchecked use RX2. Also changed the audio
driver in PSDR and Skimmer to WDM-KS. Changed RX gain for VAC –9.
None of these improved decode.
Zack
- Original Message -
From: Tim Ellison, W4TME t...@flex-radio.com
To:
Just looked and in the S ounds and Audio D evices P roperties no VAC items are
the default devies in any tabs. - Original Message -
From: Tim Ellison, W4TME t...@flex-radio.com
To: vtnn...@comcast.net
Sent: Saturday, August 27, 2011 6:28:53 PM
Subject: Re: [Flexradio] My settings -
Zack,
I just configured my 5000 identically to the info you provided (except
for the two changes I recommended) and it is decoding fine.
Here is a dumb question. You don't have CW Skimmer in Blind mode do you?
-Tim
---
Tim Ellison, W4TME
Product Management, Sales Support
FlexRadio Systems™
It was not in blind mode. Never tried that be fore but when I put it in blind
mode all decoding s topped.
I am starting to lean towards removing PSDR, VAC (I know that there are special
instructions to remove VAC BTW), DDUTIL, the Flex driver and Skimmer, rebooting
and reinstalling all.
What is your computer's hardware configuration?
73
On Sat, Aug 27, 2011 at 7:50 PM, vtnn...@comcast.net wrote:
It was not in blind mode. Never tried that be fore but when I put it in
blind mode all decoding s topped.
I am starting to lean towards removing PSDR, VAC (I know that there are
Hi Tim,
What the is blind mode?
George
W2GS
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz]On Behalf Of Tim Ellison, W4TME
Sent: Saturday, August 27, 2011 6:36 PM
To: vtnn...@comcast.net
Cc: Flex Radio; t...@flexradio.com
Subject: Re:
It is a homebrew PC.
Intel Core 2 Duo E7400 2.8GHZ
4 GB RAM
ASUS P5Q SE2 motherboard
The firewire card is DV compliant. It has a TI OHCI compliant chip and I think
is a SIIG.
Video card is a Nvidia Geforce 9500 GT with 1GB of RAM.,
The C: drive is a WD. I just noticed that
Turns off CWS decoding so no call signs appear.
-Tim
---
Tim Ellison, W4TME
Product Management, Sales Support
FlexRadio Systems™
4616 W Howard Ln Ste 1-150
Austin, TX 78728
Phone: 512-535-4713 Ext. 223
Email: t...@flexradio.com mailto:t...@flexradio.com
Web: www.flexradio.com
18 matches
Mail list logo
