Hoping this makes the list OK.
I have a pair of Behringer MS20 monitor speakers and they are fine. They sit
atop the tuner and have never caused me any issues with RFI at all.
3.5mm, phone & optical inputs - a decent combo.
73
Steve M0RFC
FLEX 3000
> -Original Message-
> From: FlexRa
Curious to hear what folks are using for powered speakers on their Flex 5000.
Presently using a pair of JBL E20 bookshelf speakers with a little amp. Can’t
seem to keep the RF out of the speakers however. Your thoughts and
recommendations would be greatly appreciated.
73,
Roger
I am using a pair of Cambridge SoundWorks powered speakers from a 15 year old
computer. I had the same problem with RFI. I solved the problem by replacing
the zip cord speaker wire with shielded cable and adding snap-on RF chokes at
the speakers and the amp output.
73,
John, N8WNA
-Ori
I'm using two pairs of Genelec 6010A. -ZERO RFI.
No wonder, because the founder of the company is ham. PRO stuff.
73, Timo OH5KW
On 9 Oct 2013, at 13:41 UTC, Roger Cole wrote:
> Curious to hear what folks are using for powered speakers on their Flex 5000.
> Presently using a pair of JBL E20
I'm using a (one) Fostex 6301B.
Rob, PA3CNT
2013/10/9 Timo Toro
> I'm using two pairs of Genelec 6010A. -ZERO RFI.
>
> No wonder, because the founder of the company is ham. PRO stuff.
>
> 73, Timo OH5KW
>
> On 9 Oct 2013, at 13:41 UTC, Roger Cole wrote:
>
> > Curious to hear what folks are us
I am using the Sonos music system. It is a networked system that is wireless
and I have 4 units throughout the QTH including the ham shack. I merely
connected the audio output of the 5000 and plugged it into the Line Input of
the Sonos unit in the ham shack. Through my iPhone or computer I can l
Hanford,
Yes, you will need an interface on the 30l-1 KEY (ptt) input.. The
voltage on that line WILL BLOW the driver in the F3000.. Other only
other interconnect that you need to connect is the RF..
The F3000 does not have ALC.. It does have pretty good control the RF
out level and you will
MS-40 pair. No RFI and sound absolutely awesome, esp on SWL with a nice
wide BW and SAM. Best of all they have multiple inputs; one used with Flex
5000 while the 2nd input used for PC via optical link.
Gedas, W8BYA
Gallery at http://w8bya.com
Light travels faster than sound
This is why som
I have a set of Bose Companion 2 Series IIs, with the one with the amp directly
on top of my Flex
VU5K. I put ferrites on both the PS and audio inputs, just for good measure
when I installed them.
Not a hint of RF.
73s,
Alan
WA4SCA
<-Original Message-
mailto:flexradio-boun...@flex-ra
I second that!
I used them on my F1K, F1.5K, F3K, F5K and now on the F6.7K with wonderful
results.
And as Alan said "no hint of RF(I)" Priced at around $40 bucks.
Ernest - W4EG
> From: wa4...@gmail.com
> To: flexradio@flex-radio.biz
> Date: Wed, 9 Oct 2013 12:57:35 -0500
> Subject: Re: [Flexr
Using the COMspkr pair acquired from West Mountain Radio
73
Larry - W8LIG
On Wed, Oct 9, 2013 at 1:00 PM, wrote:
> Send FlexRadio mailing list submissions to
> flexradio@flex-radio.biz
>
> To subscribe or unsubscribe via the World Wide Web, visit
>
> http://mail.flex-radio.biz/mailman/
I use a pair of KRK Rokit 5s. I'm thoroughly pleased with them.
On Wed, Oct 9, 2013 at 2:10 PM, Ernest Garcia wrote:
> I second that!
> I used them on my F1K, F1.5K, F3K, F5K and now on the F6.7K with wonderful
> results.
> And as Alan said "no hint of RF(I)" Priced at around $40 bucks.
>
> Er
I saw this question asked two days ago with no response. The email
subject was not changed to reflect the question, but it was asked with
no response to the reflector.
I like to repair my own equipment. I asked this question of Flex-Radio
months ago. I was told ECOs are not available outside t
I'd like to know as well
73...Jordan VE6ZT
- Original Message -
From: "Bill Bordy, NJ1H "
To: "FlexRadio Reflector"
Sent: Wednesday, October 09, 2013 12:39 PM
Subject: [Flexradio] Flex-5000A ECOs?
I saw this question asked two days ago with no response. The email subject
was n
And I'd like to know what an ECO is
73,
Ken Alexander
VE3HLS
On 09/10/2013 2:41 PM, Jordan Arndt wrote:
I'd like to know as well
73...Jordan VE6ZT
- Original Message - From: "Bill Bordy, NJ1H "
To: "FlexRadio Reflector"
Sent: Wednesday, October 09, 2013 12:39 PM
Subject: [
Engineering Change Order
Jim
W4YXU
On Wed, Oct 9, 2013 at 2:18 PM, Ken Alexander wrote:
> And I'd like to know what an ECO is
>
> 73,
>
> Ken Alexander
> VE3HLS
>
>
> On 09/10/2013 2:41 PM, Jordan Arndt wrote:
>
>> I'd like to know as well
>>
>> 73...Jordan VE6ZT
>>
>> - Original Me
Is there an easy way to tell if my 5K has the 160m spur mod done
before I bother the guys at Flex?
Thanks
Ron
K0IDT
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archiv
On Oct 9, 2013, at 10:00 AM, flexradio-requ...@flex-radio.biz wrote:
> Send FlexRadio mailing list submissions to
> flexradio@flex-radio.biz
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
> or, via
I have used the Bose companion II for foul years withe all the flex radios
running legal limit. Never had issues with rf . Great sound. At this time I
have my 6500 , 3000 and 1500 hooked up at the same time, I only run one radio
at a time but could run all. Great sound built great, look great.
Also don't blaming the speakers until you see if you have stray rf , if you can
find one of the old cb meters with the antenna that will pick up rf without
being hooked to a radio, a field strength meter. That will show if you have
stray rf.
Sent from my iPad
> On Oct 9, 2013, at 8:41 AM, "Rog
I also run Bose Companion II powered speakers with Flex 5000 and legal limit
amplifier with no rf issues. The sound quality is excellent.
Dave, W7IWW
-Original Message-
From: FlexRadio [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Dale
Hankins
Sent: Wednesday, October 09, 2013
RE:
Date: Wed, 9 Oct 2013 09:41:23 -0400
From: "Roger Cole"
To:
Subject: [Flexradio] Powered Speaker Recommendation for Flex 5000
Message-ID:
Content-Type: text/plain; charset="UTF-8"
Curious to hear what folks are using for powered speakers on their Flex
5000. Presently using a pair of JBL
Normally I use headphones with my 5000 but this past summer I lashed up
an old Bogen 18 watt tube amp (found it in recycled trash) and it drove a
3-way bookshelf speaker with a 12 in woofer. Shielding in the amp was
minimal to nonexistent but no RFI problems even driving the amplifier.
Worked and s
I like to listen to music while in the shack working on my computer hence I
bought Pioneer S-DJ05 powered studio monitors which have the advantage of
having 4 switchable inputs.
Although not cheap (nor are the Genelecs proposed earlier) they are not prone
to RFI at all and really provide a clea
24 matches
Mail list logo