Harry,
Check your S-meter in the Flex, go to the Tests tab of Setup. Click the box
in the lower left corner labeled. Enable HW Generator.Put the radio in
any ham band, mode in DSB. the reading above the s-meter should be -24dbm
plus or minus 1dbm.Do that with the 9800..
73,
It appears that my 5000 S Meter is at least 10 db shy of where it needs to be.
This is based on comparison to my Icom 9800. I hear everything well and pre amp
works fine. Is there a process to recalibrate the S Meter???
Harry
___
FlexRadio Systems
What makes you think the 9800 is correct , I'm willing to bet it is the flex
that is correct .
Kf4yox
Sent from my iPhone
On Jul 10, 2015, at 4:14 PM, Harry Hahn via FlexRadio
flexradio@flex-radio.biz wrote:
It appears that my 5000 S Meter is at least 10 db shy of where it needs to
If you have a friend with a calibrated RF signal generator, I would check
it before I
would send it in for re-calibration.
--- Graham / KE9H
==
On Fri, Jul 10, 2015 at 3:33 PM, Samuel Strongin kf4...@embarqmail.com
wrote:
What makes you think the 9800 is correct , I'm willing to bet it is the
4 matches
Mail list logo