Hello all
I am selling my flex 3000
It comes with the controller and cables
Asking $1000
e mail at ope...@rcn.com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
Hi Dudley
Have you forgotten me lolI know you said you were busy Monday but you did
say you would get back to me that day.
I did all that you requested and still the radio shuts right down the second I
key up. I have tried 3 different runs of coax
and antennas and with the same results.
I
Hello
I put in for a ticket to send in this radio for repair but it keeps telling me
I have typed the wrong version for this flex radio 3000
Can someone at flex respond
Thanks
Bill
ope...@rcn.com
___
FlexRadio Systems Mailing List
Good morning all,
I was wondering if any of you folks who have moved up the the 6000 series
radios
might have a left over Hercules DJ Controller MP 3. They no longer make them
and I can not find one.
I would very much like to buy it from you as you can no longer use it.
Thanks
Bill
Jim K5mid
I lost your e mail
ope...@rcn.com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Ok, I find that the Flex 3000 offers me much more capability in terms of tuning
the radio and its use on AM. There are many other features on the 3000 that
are not in the 6300 that are important to only me. What is important is not in
need for discussion here.
So, I am asking if anyone has
Thank you all for making an offer. I found an immanent buyer or trade etc.
Already
Bill
ope...@rcn.com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
Good morning all,,
I wonder if anyone is using some kind of external control to run their radio.
When I had the flex 3000 I could control it with the Hercules DJ controller.
I can not use that with the Flex 6300. I’ll tell you why it is important. I
am getting older and it is very hard for
Can anyone recommend a good Transverter for the Flex 6300??
thanks
Bill
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Hi folks, I know a lot of people use the community screen or whatever you call
it but I never seen to be where I want to post something. I find this the best
for me. Now, the other day someone posted a video of showing how to get rid of
any interference one may have. Now my average noise
All of a sudden it is workingNever Mind I think I was trying to tune up
too close to the edge of the band
Bill
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
Uh O My 6300 seems to have a problem. When I click on Tune, Mox, Atu, Mem,
or my external PTT nothing happens I can not transmit to tune. Any advice
before asking for desk help?
Thanks Bill
ope...@rcn.com
___
FlexRadio Systems Mailing List
Good afternoon
I have just started using the Flex 6300 when I realized I do not have a meter
that is telling my drive power or the watts I am putting out. Did I miss
something in the book or do I have to put
an external meter myself
Thanks Bill
___
If they are using that little bar graph then I better buy and external meter
as that is so small I can not read it and the color blue over black makes even
worse. Ok thanks all it is off to the stores I go..
Bill
___
FlexRadio Systems Mailing List
Good afternoon.
A couple of questions. One, do you have to use powered speakers With the Flex
6300? I ask this because when I used the Flex 3000 I did not have any
feedback or interference. Now I do. I can add all the chokes and such but I
wanted to know if I need Power speakers???
The
Good evening folks,
Question on putting in line an Amplifier. When I had the flex 3000 I just had
the wire coming from the TX out on the 3000 and went to 811H. On this radio
(Flex 6300) after reading the manual I do not know where to put the RCA plug,
I see it has an ALC connection on the
Hello all
Does anyone know where I can go to find the full manual for the Flex 6300??
The only place I find one is on e-bay and I do not want to pay money for it.
Thanks Bill
ope...@rcn.com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To
Wow, a lot of nice gadgets coming for the 6000 series radios. So my question
is, is anyone selling a perfectly running 5000 or 3000 that I can buy?
Thanks all
Bill
e mail me at ope...@rcn.com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
A test to check the e mail list
thanks
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
For Sale, my Flex 3000. It is in perfect working condition. I do not have
the mic as I use a broadcast mic and I misplaced the little mic that comes with
the radio
I want $1,000. E mail if interested. ope...@rcn.com
Thanks
Bill
___
VK3
What! you do not have the balls to sign your note. If you do not like a
post then delete it.
You are a rude idiot.
Bill N1EHM
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
Hi folks
I may have asked this before but I am going to ask again. The Flex 1500, can
it be used on 2 meter repeaters??? Simplex??If the answer is yes where to
I buy the transverter and an amplifier that will work on 2 meters.
Thanks
Bill
ope...@rcn.com
Hi Guys,
For Sale. For Flex radios or any others. Have the best AM modulation going.
You can also use it on SSB.Perfect condition. The 528E is a complete,
self-contained voice processor that performs six separate functions: microphone
preamplification, de-essing (sibilance removal),
Questions, questions.
Before buying one needs to ask all the important questions.
So, how wide is the Transmit width on the Flex 6300 for AM, and on the 5000?
Mine is the 3000 and I can get a total of 9 K. 4.5 each side.
This is a vital statistic for me.
Thanks Folks
Bill
ope...@rcn.com
Anyone know where I can go on u tube or elsewhere to see and hear a demo of the
flex 6300 on FM 2 meter repeaters,, simplex etc.
Thanks folks
Bill
ope...@rcn.com
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the
Hi folks
I wrote the sales people but I did not get an answer. Perhaps you could answer
the question for me. Does the flex 6300 allow you to get on two meters? What
is the XVTR BCN connector for?
Thanks Bill
ope...@rcn.com
___
FlexRadio Systems
Hi Folks
For Sale:
Flex Radio 3000. Asking $1,500. Before you get nervous check what it is
coming with. Computer built for the Flex by Neal, about a year and a half old.
Loaded with about 6 ham radio programs. The computer is the one that cost
$1,135.00. Look up Neal‘s computers.
Hi Folks
I have developed a strange problem in my Flex 3000 and I wonder if anyone else
has come across this kind of problem.
When I listen in the AM mode and I do all the time, someone is talking and then
suddenly I hear this Bdrrr. This happens about every
five minutes
I wonder if there was shipping damage, it has happened to me.
But, as for his not answering some of your questions I suspect he does not know
how to use SDR
Take it back check it out and sell it to someone else. You will have no
problem selling it
BillN1EHM
ps make sure everything is
Hi Folks.
I love the Flex 3000 especially since I am an “AMer.” My question is this
since I have been reading all the recent posts. When you say you have 2mtrs
and 440 etc. What do you mean by that. Can you actually get into repeaters
or do you do simplex and SSB. Also, what is the added
Well Folks
I tried the forum like some have suggested. I was reading for about 15 min
when I realized those posts I read were in 2008. I find it much to tedious and
time consuming to find an answer to any question. On this e-mail I ask a
question and Boom I have the answer. I think I will
I received my own email back so I guess it has just been very quiet
‘Bill
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Hi all
Just a test. Did I delete myself from the e mail list. Have not seen a
comment out here in over a month. lol
Bill
N1EHM
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
Help, help, help
I can not turn on my flex 3000, I get a screen that tells me to use a Demo but
no access to the program.
I for get the address for a ticket?
Thanks
Bill
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the
Hello folks,
I hate to make this request out here but I have been burned twice very badly on
e-bay and I will never use it again,,The question is, does anyone have a
two meter all mode for sale. Or, 2 and 440 all mode in very good shape. You
can reach me at ope...@rcn.com
Thanks
Thanks guys. The new controllers look great but late last night I found the LE
in Italy. $200 Wow. So I bought it. What I like most about it is the
ability to control the output of power when tuning an amplifier.
Talk to you all soon
Bill
___
OMG, they are no longer selling the Hercules LE3 anywhere. Does anyone have
any suggestion or have one for sale. That again, is the Hercules
DJ Contor MP3 LE controller
Thanks once again Bill
___
FlexRadio Systems Mailing List
Hello everyone,
Does anyone recall the model number of the Hercules DJ Control? They have
several but the early version worked very will on the 3000
If you do then do you also know where you go to get instructions to put it into
the flex program.
Thanks Folks.
Bill
Hi all,
Anyone know how long it takes to get a ticket for help
Thanks Bill
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the Reflector:
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Hi Folks,
Can anyone tell me how to get a ticket to have the 3000 checked out and worked
on? I never needed one before and do not know how to go about it.
Thanks
Bill
N1EHM
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of
Hi Guys,
I seem to have run into the automatic tuner not able to tune correctly.
Before I ask for a ticket has anyone ever had a tuner go bad. The antenna port
seems a little loose. It is the Flex 3000. Can I add an external tuner in
front of the radio should I decide not to get a ticket
Again, thanks for all the inquiries on the trade offer. I made a trade to the
first person that offered to trade. I sold the last 3000 I had and it was the
biggest mistake I ever made I will never do that again unless I hit the lottery
and buy the 6300. lol
Thanks folks
Bill
Good morning flex folks,
Is anyone willing to trade their flex 3000 for a Kenwood TS 2000, a rig with HF
6, 2, and 440 in it. This radio is about 2 months old.
Please reply to ope...@rcn.com
Thanks Bill
N1EHM
___
FlexRadio Systems Mailing List
Thank you all for responding to my making a trade. I received an e mail very
early this morning and have made a trade. Hope to catch ya on the air.
Thanks to all
Bill
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
To opt out of the
44 matches
Mail list logo