[Flexradio] Addition to KB Flex5000

May I extend this frequently asked question by: I the Flex5k still an open software SDR? (I might mention that I bought the 1k only because it has open software. I would certainly buy a not open software rig.) Luer, DF5TP Jim Lux schrieb: >Quick question: >Q40:Q40. Will the FLEX-5000's low-pass

Re: [Flexradio] EDIROL FA-66 microphone input problem ?

I have the same connection setup with a Heil HC-4 in a head set. With the SENS-poti on the FA-66 180° from zero, no problem. 73, Luer, DF5TP Everett Palmer schrieb: >Hello, > >I finally tried hooking a microphone up to my new EDIROL FA-66 >soundcard. I followed the suggestions in the quick st

Re: [Flexradio] Drifting Newbie

While following the interesting discussion of possible improvements on frequency stability, I think of the concept used in my aged Kachina. This is also an SDR and is stable to better then 1 Hz as soon you are able to measure after turning it on. Which in my case was about 20 secs. Kachina just

Re: [Flexradio] Suggestions to stop "popping" while in receive

In short: Windows is really a blessing to everybody who wants to do real things with it, appart from writing letters, is'nt it? Luer, df5tp Doug McCormack schrieb: >My SDR had annoying random crackling sounds on both my Dell 1.8 GHz >machines. > >I found if I covered the panadaptor with another

Re: [Flexradio] Help with Edirol

I don't dare to ask, but: is the power there in the radio? I had the same when this was not the case. 73, Luer, DF5TP José Dumoulin schrieb: >Hi Friends > >After 3 years of using my SDR1k and Delta 44 with extrème satisfaction, >I bought a notebook and an Edirol FA-66 to facilitate moving and >

[Flexradio] [Fwd: Preamp issue?]

Dana, the SDR-1000 has the lowest noise floor you can expect from a radio. I am evaluating this radio and compare it with my Kachina and the measurement results of other leading radios. I wonder what you mean with the sampling rates you mention for the FA-66. The figures you name are Baud rates

[Flexradio] [Fwd: measure P/S volts AT THE RIG TERMINALS]

Ken, I have not tried it, but I could'nt believe that anyone sells a radio these days in this voltage range that does not accept anything between 12 and 13.8 Volts. The nominal 12 V car battery - the origin of this voltage standard - has these 12 V when used a short time without loading, it ha

[Flexradio] [Fwd: RX only Antenna]

Mark, I'm planning to install an RX only antenna. I will have a relay to detach and ground this antenna, if the TX signal of one of the stations goes active. This implies two things: the TX active signals have to appear earlier than the HF power - which is the case with both the SDR-1000 and th

[Flexradio] To the Webmaster: I receive mails twice

Hi, since January 17, 16:35 UTC, I receive every Reflector mail twice. I have no idea, how it comes or why. Other mailes come in normally. 73, Luer (df5tp) ___ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/f