Re: [Flexradio] KPA500 and Flexradio 5000 - how to connect?

2013-07-03 Thread d...@lightstream.net
Hello Bernd, You only need two cables between the KPA500 and your FLEX5000A: 1.) Connect a cable with an RCA Phono plug on each end from the F5K 'AMP RLY TX1' connector, to the KPA500 PA KEY connector 2.) Connect a cable with a PL-259 on each end from the F5K ANT1, ANT2, or ANT3 connector, to

Re: [Flexradio] [FlexEdge] Active Receive Antennas with Flex 6700

2013-04-23 Thread d...@lightstream.net
Hello Rick, Although I don't have any experience with these two manufactured products, I have been playing with homebrew broadband magnetic loops and broadband voltage probe receiving antennas. Both antennas have very low output levels, and require significant amplification. In the case of the

Re: [Flexradio] Possible image problem in 2.6?

2013-03-17 Thread d...@lightstream.net
Hello Don! If you have the second RX, do you see the same behavior with it? If you set up the radio as though you were operating split, does the signal remain there, or does it move up near the TX split frequency? (Just trying to rule out that it's coming from the TX) 73, Dale WA8SRA Tim