Mike,
PORTMON normally shows the opening/closing activity as well as the
traffic. So my conclusion is that rigctl is not getting as far as
opening the correct port ( or any port ?? )
AL, K0VM
On 3/14/2012 4:17 PM, Michael Walker wrote:
I guess I am going to have to go look at the source c
I guess I am going to have to go look at the source code for rigctl, but
does the error message:
IO Error
Tell me that it can't send data to the port, or that it can't open the port.
My guess, is that the port got opened, but you can't move data into it.
That is why PORTMON would show no activi
...@flex-radio.biz wrote:
Date: Wed, 14 Mar 2012 10:18:51 -0400
From: Michael Walker<>
To:flexradio@flex-radio.biz
Subject: [Flexradio] 3000 and WSPR CAT control
Message-ID:
Content-Type: text/plain; charset=ISO-8859-1
All
Has anyone had any issues getting WSPR to talk to the CAT port
On Wed, Mar 14, 2012 at 11:54 AM, Brian Lloyd wrote:
>
> ...Change to using a 2nd port pair for PTT and using Kenwood TS-2000 for the
> attached radio.
>
==
That's the setup that does not work. Mike's previous posts enumerate
the setups he has tried. His question is not what the basic setup is
On Wed, Mar 14, 2012 at 7:36 AM, Tony Estep wrote:
> On Wed, Mar 14, 2012 at 9:18 AM, Michael Walker
> wrote:
>
> > Has anyone had any issues getting WSPR to talk to the CAT port on the
> 3000?
> =
> Mike, I haven't been able to get it to automatically set the xmit
> frequenc
On Wed, Mar 14, 2012 at 7:18 AM, Michael Walker wrote:
> All
>
> Has anyone had any issues getting WSPR to talk to the CAT port on the 3000?
>
Yes. It was a serious problem for awhile. If you read my description on the
Wiki for making WSPR work then you should have no problems. Here are the
key p
adio.biz] On Behalf Of Michael Walker
> Sent: Wednesday, March 14, 2012 8:19 AM
> To: flexradio@flex-radio.biz
> Subject: [Flexradio] 3000 and WSPR CAT control
>
> All
>
> Has anyone had any issues getting WSPR to talk to the CAT port on the 3000?
> I'm running VSPmanager as m
alker
Sent: Wednesday, March 14, 2012 8:19 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] 3000 and WSPR CAT control
All
Has anyone had any issues getting WSPR to talk to the CAT port on the 3000?
I'm running VSPmanager as my virtual com port redirector. Both the com
ports are in control
I did find this on the WSPR forum that I will have to give a try to.
Worst case, is I will try using 2 hardware ports and a cable.
Mike va3mw
*From another thread by OE1MSB*
*Menu -> Setup -> Station Parameters -> Handshake*
*Select "Hardware" and add "-C write_delay=0" so that this is sh
On Wed, Mar 14, 2012 at 9:18 AM, Michael Walker wrote:
> Has anyone had any issues getting WSPR to talk to the CAT port on the 3000?
=
Mike, I haven't been able to get it to automatically set the xmit
frequency when I click on the Band selector, as it should do and does
do wit
All
Has anyone had any issues getting WSPR to talk to the CAT port on the 3000?
I'm running VSPmanager as my virtual com port redirector. Both the com
ports are in control panel and there are not hidden com ports.
I'm normally pretty good with all the virtual RS232 communications.
I can't seem
11 matches
Mail list logo
